new
the bottom bearing is the stock xs11 size!the top one I had made from a common 48mm one(spun down the otter race)...the triple tree bolted right in...smooth as butter. this will lower the front end by about 1.5 to 2 inches. the s/a extendeds by 2.5 inches should handle nicely....
the bottom bearing is the stock xs11 size!the top one I had made from a common 48mm one(spun down the otter race)...the triple tree bolted right in...smooth as butter. this will lower the front end by about 1.5 to 2 inches. the s/a extendeds by 2.5 inches should handle nicely....
Comment