If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
OK, The battery's under the seat (Balistic 8 cell) and the carbs I believe do have pumps as they are fcr flatslides and not stock. There is no choke. I think that's what my mechanic said. He told me to pump it twice on start up. Most people on here said I wouldn't be able to run these carbs, he said no problem, so hmm. You saw it run right?
OK, The battery's under the seat (Balistic 8 cell) and the carbs I believe do have pumps as they are fcr flatslides and not stock. There is no choke. I think that's what my mechanic said. He told me to pump it twice on start up. Most people on here said I wouldn't be able to run these carbs, he said no problem, so hmm. You saw it run right?
Aww, come on Tod, they are just checking the smoothness/ total rotational travel of the slides, just to make sure that they aren't hanging up.
Or maybe racer's nervous twitch.
CZ
LOL.. Must just be a twitch, 'cause the slides don't move either.
Aww, come on Tod, they are just checking the smoothness/ total rotational travel of the slides, just to make sure that they aren't hanging up.
Or maybe racer's nervous twitch.
OK, I give.. Where's the battery? And also... It cracks me up when I see guys pump the throttle a couple times before starting these bikes. There's no accelerator pumps on these carbs and it does absolutely nothing but raise the butterflies and close them.
Try holding the control key while making your selections. Perhaps that will let you move a bunch at a time.
Hi Marty,
I tried that with no success. I was able to "drag" some but that seems to be hit and miss.Ran out of patience last night.
Looks as though it will be easier just to laod them again into the album I want them in.
Phil
Hi Marty,
I already figured out how to move One at a time what I am hoping for is to move all 60 at once or atleast larger batches than just one.
I have not posted the pictures anywhere so no links to be lost.
Phil
Phil,
Try holding the control key while making your selections. Perhaps that will let you move a bunch at a time.
Leave a comment: