Bike photos

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • STEPPENWOLF
    replied
    Yuppers that blue sure is purdy

    Leave a comment:


  • DGXSER
    replied
    Very close to the red I am going for on the SG. Not a great pic, but gives the idea.

    Leave a comment:


  • jetmechmarty
    replied
    Originally posted by jwhughes3
    Love that blue color!

    John
    I like both color choices!

    Leave a comment:


  • jwhughes3
    replied
    Love that blue color!

    John

    Leave a comment:


  • SFSPECBIKER79
    replied
    Notice my pictures missing

    POST SOME NEW SHOTS, HADNT BEEN ON SITE FOR AWHILE. I'M STILL AROUND JUST NOT MUCH AS I LIKE ENJOY, AND THANKS TO XS11 WEB.

    Leave a comment:


  • STEPPENWOLF
    replied
    And you woke me to show me a picture of your bike...

    Leave a comment:


  • Petersg_99
    replied
    Oh yeah, I purchased the headlight too!

    It actually came with a Vetter headlight, but it was scrapped up on one side, I suppose I could have fixed it with some body putty, but I kind of liked the round chrome light, so that's what I ended up getting.

    The bike also has some rub marks on the case just below the heads that I'm assuming came from fairings that it once had (since it had the Vetter head light).

    Since it's painted with color change green paint, Franken bike is probably a really good name for it

    Originally posted by fredintoon
    Hi Guy,
    right then. From your posts and photos what you most likely got from the impound yard is an XS11G (AKA 1980 XS11 Standard) with a Special gas tank, an aftermarket exhaust system and a round headlight instead of the stock rectangular one.
    And that's OK, I'm not knocking it.
    Except for the bars. I find those bars to be an ergonomic disaster.
    But that's me. Marty loves them but he's at least a foot taller than me and they just might fit him.
    I'd be surprised if you can't find a good set of used bars at a local swapmeet for ~$25.

    Leave a comment:


  • fredintoon
    replied
    It wasn't you, it was the dreaded PO

    Originally posted by Petersg_99
    It has the hinged rear fender, rear tire is a 17" with a 19" on the front.

    I got the instrument cluster off of ebay, and didn't know enough to look for special versus a standard, so I'm the "guy" that screwed up and mixed tank and fuel gauge, but yep, you're right, the fuel gauge isn't working. I take it the special had the round gauges?
    The SN is 3H5-004886, and that cross references to a 1980 Yamaha XS1100G if I read the tables correctly.
    And finally, yes, the handle bars are not my first choice for beauty, and comfort, but my first goal was to get the bike on the road for as small an investment as possible (I've failed on that goal too), and then putter with upgrading things like chrome exhaust, new handlebars etc...
    Thanks for the insight on the bike. I appreciate the feedback. I doubt the bike will ever be stock again, but from where it started, I figured I couldn't really hurt it a whole bunch...
    Hi Guy,
    right then. From your posts and photos what you most likely got from the impound yard is an XS11G (AKA 1980 XS11 Standard) with a Special gas tank, an aftermarket exhaust system and a round headlight instead of the stock rectangular one.
    And that's OK, I'm not knocking it.
    Except for the bars. I find those bars to be an ergonomic disaster.
    But that's me. Marty loves them but he's at least a foot taller than me and they just might fit him.
    I'd be surprised if you can't find a good set of used bars at a local swapmeet for ~$25.

    Leave a comment:


  • Petersg_99
    replied
    It has the hinged rear fender, rear tire is a 17" with a 19" on the front.

    I got the instrument cluster off of ebay, and didn't know enough to look for special versus a standard, so I'm the "guy" that screwed up and mixed tank and fuel gauge, but yep, you're right, the fuel gauge isn't working. I take it the special had the round gauges?

    The SN is 3H5-004886, and that cross references to a 1980 Yamaha XS1100G if I read the tables correctly.

    And finally, yes, the handle bars are not my first choice for beauty, and comfort, but my first goal was to get the bike on the road for as small an investment as possible (I've failed on that goal too), and then putter with upgrading things like chrome exhaust, new handlebars etc...

    Thanks for the insight on the bike. I appreciate the feedback. I doubt the bike will ever be stock again, but from where it started, I figured I couldn't really hurt it a whole bunch...


    Originally posted by fredintoon
    Hi Guy,
    that's a typical Frankenbike and shows how easy XS11 parts will swap.
    I reckon it started life as a Special (Check for a 16" rear wheel & non-hinged rear fender) until the PO wrecked it to write off the front end.
    At that time it got the Standard forks, fender and gauges because that's what the scrapyard had available.
    After that bad of an upset, check the frame for being straight too. (Ask TC about that.)
    You will note the gas gauge don't work. That's because the Standard's gas gauge is incompatible with the Special tank's thermistor level sender.
    If you swap in a complete (taps, filler cap & rheostat sender) Standard tank you get to carry another gallon of gas and get a working gas gauge, besides.
    And on a personal note, please change out those 'orrible rototiller 'bars.
    Ugly uncomfortable things.

    Leave a comment:


  • dingman29
    replied
    Originally posted by Petersg_99
    I was browsing through some of the pictures (I'll need a bunch more time to get through all of them), and it occurred to me that the XS shifts between categories pretty easily.

    Some are decked out as cafe racers, some as cruisers, some as touring bikes, some as standard bikes, I've seen You tube videos of XS11 bobbers, and I even think I saw a trike in here somewhere. Just about the only varieties of XS11 I haven't see yet is a dirt bike and a crotch rocket.

    Pretty impressive if you ask me...
    here's a streetfighter (not mine) i stumbled across

    Leave a comment:


  • fredintoon
    replied
    Ain't the first time she's been down

    Originally posted by Petersg_99
    So, I got this "great deal" on ebay from an impound lot. - - -
    Hi Guy,
    that's a typical Frankenbike and shows how easy XS11 parts will swap.
    I reckon it started life as a Special (Check for a 16" rear wheel & non-hinged rear fender) until the PO wrecked it to write off the front end.
    At that time it got the Standard forks, fender and gauges because that's what the scrapyard had available.
    After that bad of an upset, check the frame for being straight too. (Ask TC about that.)
    You will note the gas gauge don't work. That's because the Standard's gas gauge is incompatible with the Special tank's thermistor level sender.
    If you swap in a complete (taps, filler cap & rheostat sender) Standard tank you get to carry another gallon of gas and get a working gas gauge, besides.
    And on a personal note, please change out those 'orrible rototiller 'bars.
    Ugly uncomfortable things.
    Last edited by fredintoon; 01-06-2013, 11:46 AM.

    Leave a comment:


  • Petersg_99
    replied
    This is awesome! like a ship with lifeboats.

    Leave a comment:


  • XJkid
    replied
    Love the Mini Trail/Triumph!! Awesome use of ingenuity and creativity! It must be a helluva ride.

    Leave a comment:


  • bcmike
    replied

    Leave a comment:


  • bcmike
    replied
    Photo of my toys.

    Leave a comment:

Working...