needle jet

[Schming]

Still need the emulsion tube/needle jet/main nozzle or whatever else it is called... Does anyone know where to find a replacement?

Didn't get a chance to look today but as soon as I do I'll let ya know if I have what you need.

Do you just need one ?

[darylcaribou69]

Hey!

Speaking from experience those needles are very important in the carbs. My bike would start fine and run and rev on the choke when it warmed up it wouldn't transition to the mid range, because of the aftermarket needles. I was lucky and found some NOS ones on ebay. I believe that will be your best bet. I looked everywhere online, called every dealer in Maine, nobody knew where to look. I ended up finding the part number, 452-14116-16-00 and searching for it and found the ones on ebay. Good luck!

[Schming]

Still need the emulsion tube/needle jet/main nozzle or whatever else it is called... Does anyone know where to find a replacement?

I got a chance to look last night and the nozzles out of my XS 750 parts carbs are Z70 Y-0 and are the only spares I have.

[darylcaribou69]

Emulsion tube number is 300 x-2 at least those are what are in my carbs. Just saw one on ebay. https://m.ebay.com/itm/NOS-OEM-Yamah...AAAOSw2zlXhYtA

[FarmDawg]

Mikes XS.

https://www.mikesxs.net

[werdna80]

I got a chance to look last night and the nozzles out of my XS 750 parts carbs are Z70 Y-0 and are the only spares I have.

Thanks for looking! I would appear that ebay is the only hope I have right now...

[dansmith65]

You may have already found this, but here's 2 more: https://www.ebay.com/itm/Yamaha-XS11...daPZF-&vxp=mtr