-
1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors
)
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.
-
Hey!
Speaking from experience those needles are very important in the carbs. My bike would start fine and run and rev on the choke when it warmed up it wouldn't transition to the mid range, because of the aftermarket needles. I was lucky and found some NOS ones on ebay. I believe that will be your best bet. I looked everywhere online, called every dealer in Maine, nobody knew where to look. I ended up finding the part number, 452-14116-16-00 and searching for it and found the ones on ebay. Good luck!1980 special
stock except for 4 into 2 exhaustComment
-
1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.Comment
-
Emulsion tube number is 300 x-2 at least those are what are in my carbs. Just saw one on ebay. https://m.ebay.com/itm/NOS-OEM-Yamah...AAAOSw2zlXhYtA1980 special
stock except for 4 into 2 exhaustComment
-
-
You may have already found this, but here's 2 more: https://www.ebay.com/itm/Yamaha-XS11...daPZF-&vxp=mtr80 SG CanadaComment
Tweet
Comment