yes, I used my morgan carbtune , bike warmed up, at normal idle speed of 1000 rpm. again, could an intake leak on only one cylinder cause the high idle?
Announcement
Collapse
No announcement yet.
erratic idle
Collapse
X
-
thanks for the help with this. all 4 of the rubber intake manifolds are only a few years old, all 4 of the blind plugs on the vacuum spigots are new, I just replaced all of the rubber vacuum hoses. where else should I look for a leak?
Comment
-
Did you used that crappy paper gasket that is supplied with the intake boots or dis you UAE a light coat of rtv?
Those paper gaskets I've failed in the past.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
Comment
Comment