Crank oil seals

[mack]

Ok guys, who stocks the twp oil seals for the ends of the crankshaft. I've tries nw vintage and CMS and my dealer.

[bikerphil]

Looks like the alternator side seal is still available from Yamarobber but the ignition side has been discontinued. Both seals are available in generic form without the raised outer ring.

[mack]

source

Don't suppose you have a source and number for it would you?

[trbig]

Look around and see if you can find these listed somewhere on the net. They're a double lipped seal and I've had good luck with them.









First one is a 32X45X7 and the other one is a 32X48X8.

This isn't a bad deal for them on Ebay... Might pick up a couple each in case you mess one up on the install, or just to have as spares. They don't take up much room.


http://www.ebay.com/itm/32X45X7-TC-M...item2323ea7583



http://www.ebay.com/itm/32X48X8-TC-M...item2323ea7b1d

[mack]

Thanx Big

You and I think a like, with my fleet growing you never know when extras will come in handy. As a side note, I made a jug removal tool off your basic design. Very smart idea, worked like a charm. Loved your engine thread too. Unfortunately I didn't see it until this one was already torn apart. Nice camera work.

[trbig]

Thanks. Glad it helped someone. I've seen several destroyed cylinders posted over the years.

[mack]

Oil seals

What about the ones you don't have to split the cases to install. Last xs north rally Andy blew his out and I had to trailer him home. If we'd had one of these handy we could have installed it on the side of the road.

[bikerphil]

Mack, I'm pretty sure that the Yamaha OEM seals are the only ones that have the outer protruding lip where cracking the cases is needed.