![](http://i1268.photobucket.com/albums/jj566/shockman54/valve.jpg)
so i was adjusting the shims on the valves to get them all within spec, and the #4 exhaust valve is stuck. it will rotate if i take a screwdriver and bump it with my hand, (i assume i couldn't make it any worse, but i was still pretty careful...) but it will not go up or down. there was no clearance on the valve when the cams were on, and it will go down and come back up (using the cams to push it down),but it will not come out or rotate as easily as the other valve buckets. anyone have an idea as to whats causing this? and will it be a serious problem when riding?
Comment