i used champs in the d-50 when i first got it and they did not last very long but my ngk's have been in there for years,and are still good.i pull them out once in awhile hit it with carb cleaner,a wire brush on my drill and then check the gap.
Announcement
Collapse
No announcement yet.
what spark plugs do you use?
Collapse
X
-
I usually run NGK's, but was in a hurry to get plugs just to try to solve a problem running. Later, rebuilt the carbs and the Autolites are still in. Runs smoothly, so I didn't change them.
What kind of mileage do you guys get? With my fairing, box, bags, and 225lb me on the bike, I only get about 33 mpg. Does anyone get the 47 that they tested back when the bikes were new? That's the reason for the 5th gear mod interest.John Rosko, Riding for Jesus! Make Him Lord of your life!
Comment
-
Now that I have the NGK iridium plugs, I now have a lot of wheel spin through 1st and 2nd gears. Tire has plenty of tread left, so what would be a better tire than the Dunlop 491 for traction?http://www.myspace.com/i_give_you_power
1980 XS11 Special - chopped, dropped and OCTY is still installed - NOW IT'S FOR SALE! $1,800 OBO
Famous Myspace quote:
"Don't mess with TEXAS! It's not nice to pick on retards."
It's funny because I am from TEXAS!
Comment
-
I was just about to order some spark plugs for my XS11 and they stopped carrying the Bosch 4216 at Kragen's (down the street from my shop) so I thought after reading this thread to go to eBay and order some...
Found a GREAT price at R&R Import Parts in Union City, California
( http://www.rrparts.com/index.html )
$7.25 for 4 plugs, $6.50 for shipping.
the plugs were here THE next day.
I won't buy my plugs anywhere else again.
I was so pleased with their speedy shipping I decided to call them and ask if they could get the NGK BPR6EIX iridium plugs - they can get them in ONE day... they're NOT cheap ($7/ea) but if they're 1/2 as good as everyone says I'll try a set.__________________
Ron Veil
<Ron_Veil@yahoo.com>
1980 XS1100SG
Comment
-
Gotta throw a nickle in here and see what it gets me....
The Iridium plugs are high mileage plugs in that the cathode is made of Iridium and will not deteriorate over long continuous use. Thus making the needed re-gaping requirements unnecessary for longer periods of use. To change the sparks on my Mitsubishi requires removal of the intake system, Iridium plugs are specified and will last for 100,000 miles. Mine went 130,000. I will say at 130k, they looked beautiful, but I was not going to pop them back in. The new ones did not change my mileage or my power.
The heat range of spark plugs is not the heat of the spark but the spark plugs ability to dissipate heat through the plugs porcelain... this is achieved by the length of the cathode nose inside the plug. A hotter plug retains the heat and runs at a hotter operating temperature.Kurt
Treasure Coast, Florida
I have a parking problem everywhere I go....
2001 Mitsubishi Montero
1987 944 n/a
1979 Titan
1979 Yamaha XS 1100 SF
1984 Suzuki SP 250
1987 Santana 23
1944 Aeronca L-3B Grasshopper
If it fly's, float's or fornicates..... your better off having a lease!
Comment
-
E3
They are expensive but you will never go back. No other plug even gets close.'81 1100 MNS - "Midnight XSpress"
Original except:
120 mains outer cylinders - 125 mains inner cylinders - Ceramic headers - Powder coated pipes, covers calipers, and MC's
4 pods - Air box gutted--E3 Plugs - High Back seat - Grooved out swing arm - SS brake lines
Fork brace - 160 speedo - Auto CCT
All gold paint and chrome replaced with GOLD plate
"STUPID is Forever" Ron White.
Contact me by PM -I don't deal with stupid anymore.
Big John
Comment
-
You guys got a good deal on the irdiums @ $7.00 a piece. Up here I payed $50 something for a box of four. Long story but I've bought 2 boxes since they came out - But as stated they are great & the last plugs you'll buy for quite awhile, maint free. Ran them also when I had an XS650 - really made a difference in that bike. - Dan'81 XS1100 LH - Midnight Special - been lookin' a long time for this one.
1179 big bore kit, 80SG motor
Rebuilt head, valves
TC Bros Forward Controls (Brass Pegs)
Tkat Fork Brace
T.C. Spade Fuse Box
Dyna Coils & wires
Mikesxs shocks,controls,& bars (special)
ISO grips with stelleto ends
4 into 1 black Bassani exhaust
Bridgestone Spitfires
Tuned by Tinman905
& a will to keep it.
Comment
-
Originally posted by ManitoulinLad View PostYou guys got a good deal on the irdiums @ $7.00 a piece. Up here I payed $50 something for a box of four. Long story but I've bought 2 boxes since they came out - But as stated they are great & the last plugs you'll buy for quite awhile, maint free. Ran them also when I had an XS650 - really made a difference in that bike. - DanBDF Special
80SG Vetter bagger 1196 Wiseco big bore kit, Mega Cycle Cams, slotted cam gears, ported and flowed head, bronze intake seats, Dyno Jet kit, Dyno coils and Mikes XS air pods, Venture cam chain adjuster,Geezer's regulator, Clutch mod, Mac 4 into 1 with custom built and tuned baffle, Oil cooler,MikesXS emulators mod.
Dyno tuned to 98 hp at the rear wheel.
Comment
-
Another vote for the NGK Iridium
Probably still a week or two away from getting my (first) XJ1100, but I thought I'd throw my 2 cents in. I've had the Iridiums in my '82 XJ750 for years. I've already ordered a set for the XJ1100 I don't even have yet! Never had a fouled plug in the XJ750. As a result of my good experience in the XJ, I put Iridiums in my RD400. Now, despite it's issues (and I don't know if I'll ever really get it "dialed in"!), I've never fouled a plug! Wouldn't believe it if I hadn't lived it...
Comment
Comment