Fj1200-xs1100 carbs

[cajun31]

That would just be a different throttle tube and cable pair, wouldn't it?

Yep... the video that Marty posted the link to shows Andy over in Australia doing just that on his cafe conversion of his "basket case" bike.

Bonz... I have been searching this site to see if I can find that link for your signature but sadly when the .com site died those direct links for the most part died with it. I was able to find an old thread concerning the ZRX carbs where someone had drilled them but the thread was more about they had drilled all the way through and were trying to get help on what to do to fix that. Quite an old thread.

[red bandit]

It's been many years since I put ZRX carbs on my 11 so I don't remember everything about it but I had to make a way to attach the 11 cable to the throttle on the ZRX carbs. It seems like I welded a piece on. I only used the single cable and never had a problem with the throttle not returning to idle.

[Bonz]

Thanks for checking into the link.

Checked around on the web a bit, found it.

https://xs11.club/forum/idle-talk-forum/xs11-xj11-discussion/31588-vacuum-advance-with-zrx-carbs

[Bonz]

Wanted to ask if the link above is working for you all. With the chatter going dark, figured it might have been a dead end and won't open.

[Radioguylogs]

I get "404 Not found" when I try to open that link.

[bikerphil]

The link in post #18 works, but not the one in your signature.