Street fighter/ Bobber build 2.0

[Fearthepack]

[Fearthepack]

License plate, brake light bracket.

[Fearthepack]

Roxs 2" risers to clear tank should of got 3"

[Fearthepack]

[Fearthepack]

Lowered front fender 1/2 inch trying to make it just disappear.

[Fearthepack]

1975 Honda XL250 head light installed. Why it was laying in a pile of parts.

[Fearthepack]

I love the clunky look in these tires. Also love the clunky look of square gauges. I lower mine 1 1/4 with spacers.

[jetmechmarty]

I meant that I have a special with the 16" and would like that tread. Would go nicely because I have a tracker'ish style to my bike. I like the 16" look so not interested in swapping for a 17".

Sorry, I didn't mean to suggest you should. I'm referring to the bike in the photos with the bobbed back end. I'm keeping the sixteen on my Special, too!

[mrhammer2u]

This bike wouldn't look right with the sixteen inch rear wheel.


Once you remove all the stuff from the back of a Special, the stock rear wheel starts looking goofy small, IMHO. The larger wheel gives a better balanced appearance. I look forward to seeing pics of this bike fully assembled.

I meant that I have a special with the 16" and would like that tread. Would go nicely because I have a tracker'ish style to my bike. I like the 16" look so not interested in swapping for a 17".

[jetmechmarty]

Love those tires. Wish they made a dual sport for the Special's 16" rear.

This bike wouldn't look right with the sixteen inch rear wheel.


Once you remove all the stuff from the back of a Special, the stock rear wheel starts looking goofy small, IMHO. The larger wheel gives a better balanced appearance. I look forward to seeing pics of this bike fully assembled.

[mrhammer2u]

Love those tires. Wish they made a dual sport for the Special's 16" rear.

How you going to cap off your frame?

[Fearthepack]

Seat pic

[Fearthepack]

Upon tear down I noticed the dots on the cam did not match up with the arrows.




And only the exhaust cam gear had the arrow above its bolt hole in the correct orientation the intake did not.

[Fearthepack]

Well on the way!

[Fearthepack]

Base gasket was leaking real bad so I'm going to replace so out comes engine for gaskets and 2nd gear fix.