Tweet
I have a 81 XS 1100 SH.........looking for the carb. butterfly shaft end O rings. They are under a washer and c clip at the ends of this shaft. Any help would be great!
-
At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 special -
Those aren't o-rings, they're actually a U-shaped seal. You can still get 'em new....
http://www.boats.net/parts/detail/ya...997-00-00.htmlFast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone... -
Rings....
Thanks Steve, you are correct. After removing them I see it!. Thanks again. Got them on order.
At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
-
Just FYI on the boats.net seals. Shipping is PAINFULLY slow. Other than that, can't beat the price.'81 XS1100 SH
Melted to the ground during The Valley Fire
Sep. 12th 2015
RIPComment
-
Hi brcree,Originally posted by brcree View PostI have a 81 XS 1100 SH.........looking for the carb. butterfly shaft end O rings. They are under a washer and c clip at the ends of this shaft. Any help would be great!
can you change those seals without dismantling the butterfly & shaft?
I've always fought shy of that task so mine are presumably the same seals that were installed at the factory.Fred Hill, S'toon
XS11SG with Spirit of America sidecar
"The Flying Pumpkin"Comment
-
www.powersportsplus.com has proven very fast for me.Originally posted by 81xsproject View PostMarty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
Thanks Jet.........@Fred.......they aren't hard to get out, I used a hooked dental pick tool and kept picking at the seals. Just take it easy, by now they are pretty crusty and hard. Take your time and they will come.
At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
-
One side can be replaced, but not both. Part of the linkage is peened onto the shafts, so to get to both seals the butterfly and shaft have to come out...Originally posted by fredintoon View PostFast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
seals
Hey Steve......I could get both seals out with no prob. Are the carbs different between the years in this area? I just removed the "C" clips and a washer.Last edited by brcree; 10-15-2012, 11:38 AM.At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
-
For your SH, you need seal 256-14997-00-00.Originally posted by brcree View Post
Item #38 on the breakdown.
Here is the link I got this from:
http://www.powersportsplus.com/parts...0SH/parts.htmlMarty (in Mississippi)
XS1100SG
XS650SK
XS650SH
XS650G
XS6502F
XS650EComment
-
seals..
Thanks Jet.......I guess I should have stated the seals are on the outside of the outer carbs.At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
-
There's two seals on each carb; to replace both, the rack has to be broken and the shafts/butterflys have to come out.Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
seals...
My bad Steve......you are correct. I didn't think about the inner ones being bad. Live and learn.At this time:
1985 Goldwing Innr.
1976 cb 750 cafe racer
2007 vtx 1300
81 sx 1100 s h
81 sx 400 specialComment
Comment