Tweet
As of today i still havent seen my bearing yet. I have checked the mail every day, it could be here today or tommorrow. I was just checking to see if you had heard of any reason that i could not make the leap across the pond or if it had been lost in the mail. Anyway im sure it will show up one of these days.
-
80 XS1100G Black Betty (Daily Driver)
79 XS1100SF (Buddys Project)
82 XJ750 Maxim (Fathers Bike)
81 CB750F SS (Buddys Project)
06 GSX600F Sold! (Was Mine)
81 XS1100 Failed Bobber Project (Mine)
81 XS1100 Parts (Mine)
Grip it, Rip it, and Stick it!!! -
Any of these bearings still available??
Ran across your post, and since I plan on riding
my 1979 XS1100SF for many years to come. I'd like
to have some of these bearings.
FredComment
-
Bearing Order
Thus, if you have them I'd like the remaining 2. Are these bearings interchangable Left or Right or are these Left only?
FredComment
-
They are left only. The right side is easily available at any bearing supply place or online.Nathan
KD9ARL
ฮผฮฟฮปแฝผฮฝ ฮปฮฑฮฒฮญ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
Bearings
Just came across this post today. Sounds like they may be all gone. But, just in case they are not I'd like to get one. Got one from your last order about a year ago I think. Got two XS's should have one more bearing. Thanks
blkryno
81 11 SH (83 Venture cct, Tkat fork brace on )
79 11 SF (83 Venture cct on the shelf for it.)
Semper Fi
Loud Pipes
Draw CopsComment
-
Are you the person who sent me an international money order? If so, I tried unsuccessfully to e-mail you. I've returned the MO to you because it costs $20 here to cash it. It was for the wrong amount ($3.20 short) and also in US dollars, hence the charge at my bank. That's why it's much easier to use Paypal.Last edited by James England; 06-20-2012, 04:30 PM.XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
As Natemoen has pointed out, they are the rear left side bearing. The right side can be bought anywhere and they are not expensive.
If you are planning to use your XS1100 for years, then I'd say it's essential to have at least one spare bearing. My own bearing broke and I ended up paying almost $100 (or thereabouts, I recall) for a NOS one on eBay after a week or so. I was lucky, as I've been e-mailed by several XSives who bought spares from me and they were off the road completely because of bearing failure. One of them languished for 3 months (in Norway) with his bike off the road. So... wise move if you plan on keeping the bike!
I've PM'd you......XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
Bearings
Just sent the money through PAYPAL a few minutes ago. Thanks for getting back so quick.
blkryno
81 11 SH (83 Venture cct, Tkat fork brace on )
79 11 SF (83 Venture cct on the shelf for it.)
Semper Fi
Loud Pipes
Draw CopsComment
-
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
I sent you the money using pay pal per your instructions and you had emailed me saying you recieved payment and that it was in the mail. It may be sitting at the post office i will check and find out.80 XS1100G Black Betty (Daily Driver)
79 XS1100SF (Buddys Project)
82 XJ750 Maxim (Fathers Bike)
81 CB750F SS (Buddys Project)
06 GSX600F Sold! (Was Mine)
81 XS1100 Failed Bobber Project (Mine)
81 XS1100 Parts (Mine)
Grip it, Rip it, and Stick it!!!Comment
-
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
Waiting til the last minute. If you've got one left please let me know, James. Thank you.Comment
-
Ok James sounds good ill keep an eye out for her. Just giving you a heads up. I will let you know when it gets here.80 XS1100G Black Betty (Daily Driver)
79 XS1100SF (Buddys Project)
82 XJ750 Maxim (Fathers Bike)
81 CB750F SS (Buddys Project)
06 GSX600F Sold! (Was Mine)
81 XS1100 Failed Bobber Project (Mine)
81 XS1100 Parts (Mine)
Grip it, Rip it, and Stick it!!!Comment
-
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
My bearing showed up last nigh. I think it may have been caught up in customs since the package was open when i recieved it. But everything seemed to be there. So thanks again for all your help.80 XS1100G Black Betty (Daily Driver)
79 XS1100SF (Buddys Project)
82 XJ750 Maxim (Fathers Bike)
81 CB750F SS (Buddys Project)
06 GSX600F Sold! (Was Mine)
81 XS1100 Failed Bobber Project (Mine)
81 XS1100 Parts (Mine)
Grip it, Rip it, and Stick it!!!Comment
I must say, Royal Mail and USPS have been incredibly reliable, so I reckon your bearing will be with you soon.
Comment