Another Oddball Exhaust...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • crazy steve
    XS-XJ Guru MODERATOR
    • Jan 2009
    • 7932
    • Beautiful outer Yelm, WA
    #1

    Another Oddball Exhaust...

    First one of these I've seen....

    Error Page | eBay
    http://cgi.ebay.com/ebaymotors/XS1100-XS-1100-NEW-RIGHT-MUFFLER-REPLACEMENT-FACTORY-/380362380643?pt=Motorcycles_Parts_Accessories&hash=item588f5d5563


    Apparently Yamaha sold these as a weld-on replacement. Looks to have been built post-81, as it appears to have one of those add-on EPA plates riveted to it...
    Fast, Cheap, Reliable... Pick any two

    '78E original owner - resto project
    '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
    '82 XJ rebuild project
    '80SG restified, red SOLD
    '79F parts...
    '81H more parts...

    Other current bikes:
    '93 XL1200 Anniversary Sportster 85RWHP
    '86 XL883/1200 Chopper
    '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
    Cage: '13 Mustang GT/CS with a few 'custom' touches
    Yep, can't leave nuthin' alone...
    Tags: None
    • skids
      XS-XJ Super Guru
      • Jul 2002
      • 5043
      • Florissant, CO, USA
      #2
      Me thinks that a right AND a left would be a good thing!
      Skids (Sid Hansen)

      Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

        Comment

        • DGXSER
          Doctor of XSology(Deceased)
          • Nov 2008
          • 12001
          • Cincinnati, Ohio
          #3
          That might have been nice get before I sold off what was left of my wrecked bikes exhaust. But then, putting that on the right would have made my really good looking left side all of a sudden look like crap.
          Life is what happens while your planning everything else!

          When your work speaks for itself, don't interrupt.

          81 XS1100 Special - Humpty Dumpty
          80 XS1100 Special - Project Resurrection


          Previously owned
          93 GSX600F
          80 XS1100 Special - Ruby
          81 XS1100 Special
          81 CB750 C
          80 CB750 C
          78 XS750

            Comment

            • Toolmaker Tim
              XSive Maximus
              • May 2008
              • 671
              • South Bend, Indiana
              #4
              I have 2 of them. These were the ones I was asking about the brass adapters. I found that I could take 1 1/2" inside muffler adapter and a 1 3/4" outside adapter, slide them inside each other, and they would allow me to use the clamps on my header pipes to install them. The part #'s aren't quite the same because they are for a Special. The ones I have are in really good shape after I wiped all the crud off the chrome.
              1979XS1100SF
              K&N's and drilled airbox
              Jardine 4in1
              Dunlop Elite 3's
              JBM slide diaphragms
              142.5 main jets
              45 pilot jets
              T.C.'s fusebox & SOFA
              750/850 FD mod.
              XV 920 Needle Mod.
              Mike's XS plastic floats set at 26mm
              Venture Cam Chain Tensioner

                Comment

                Previous template Next
                Working...