vacuum lines?

[Titbit21]

by the way, i took my first ride on my xs. YAY! just lacking throttle response and lack of power

[mack]

Idle mixture screws

The manual will tell you that they are set at the factory at 1 1/4 turns out. Probably should start at 1 1/2 and do 1/4 turns. BE VERY CAREFUL NOT TO SEAT THEM TOO TIGHTLY when you turn them in to the start point. They are very pointy and delicate and will break off in the holes. Hate to ask now that they are on, but did you bench sync the carbs first.

[bikerphil]

any good threads on adjusting the air/fuel mixture? mine seem to not be getting enough gas. the plugs are dry and starting to turn white

This may help...

http://www.xs11.com/xs11-info/tech-t...colortune.html

[Titbit21]

Hate to ask now that they are on, but did you bench sync the carbs first

Well I had somebody clean and rebuild these carbs, he also said that they were benched synced. I decided to make a homemade sync tool will some tubing and fitting. Theres no need to do this blindly.