Announcement

Collapse
No announcement yet.

Front Air Command

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    No, its not going to be much of a difference. But we have one person here who said he tried it and it did make a noticable difference.
    Nathan
    KD9ARL

    μολὼν λαβέ

    1978 XS1100E
    K&N Filter
    #45 pilot Jet, #137.5 Main Jet
    OEM Exhaust
    ATK Fork Brace
    LED Dash lights
    Ammeter, Oil Pressure, Oil Temp, and Volt Meters

    Green Monster Coils
    SS Brake Lines
    Vision 550 Auto Tensioner

    In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

    Theodore Roosevelt

    Comment


    • #17
      Different compression load on each fork.............hardly likely unless your using a rubber axle shaft. Fork brace or not, there both tied together by the axle. Now individually aired and the difference between the two forks may cause the bike to handle a bit strange. No air involved, but for an example to prove a point the Honda ST and Wing have hydraulic dampening on the left fork ONLY which also cantains the anti-dive valve internally at the bottom of fork. Right and left fork both dampen on rebound. Imagine this off-sets the location of rear mono-shock which is located on the right-side swing-arm. Whoever may believe that a left or right load side affects air pressure between the forks definitely has another issue going on with the suspension or tires, or both period.
      81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

      Comment


      • #18
        as i said, ive never done it, but one of the fellars
        on the aussie site has and thats what he told me,
        i was just relaying the story from some1 that had
        experience with it.
        pete


        new owner of
        08 gen2 hayabusa


        former owner
        1981 xs1100 RH (aus) (5N5)
        zrx carbs
        18mm float height
        145 main jets
        38 pilots
        slide needle shimmed .5mm washer
        fitted with v/stax and uni pod filters

        [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

        Comment


        • #19
          There is a device on another bike like this an that is a yamaha venture royale, load leveling air system, but alot of people that have these like my self just do away with them and go to the progressive springs that work better in the first place, but if ya want more bells and bangs on your bike here ya go, just my two cents worth
          1979 xs1100 f
          142 main, 45 pilot, Jardeen crosover 4/2, no air box
          floats @ 25.7

          1979 xs1100 F
          1978 gl 1000 goldwing
          1981 gl 1100 goldwing
          !986 venture royale 1300

          Just an ol long haired country boy, come to town to spend some egg money
          when ya get bucked off, get back on

          Comment


          • #20
            It's not a big deal but if you lay down the bike the fork oil can flow from one fork to the other through the crossover line.
            -- Scott
            _____

            2004 ST1300A: No name... yet
            1982 XJ1100J: "Baby" SS Brakes, '850 FD, ACCT
            1980 XS1100G: "Columbo" SS Brakes, '850 FD, ACCT
            1979 XS1100SF: "Bush" W.I.P.
            1979 XS1100F: parts
            2018 Heritage Softail Classic 117 FLHCS SE: "Nanuk" It's DEAD, it's not just resting. It is an EX cycle.

            Comment


            • #21
              Thanks For all your thoughts.
              I'm not even going to bother with it.
              Four wheels move your body, two wheels move your soul.

              ATGATT, It could save your life!

              1980 XS 1100SG
              Dyna 3 Ohm Hi Output Coils
              Pod Filters
              DynoJet Kit
              T.C.'s Fuse Block
              Slip Streamer Turbo Windshield
              Custom Tank and Side Cover Decals
              V-Max Auto CCT

              Comment


              • #22
                Originally posted by MrOzz View Post
                Thanks For all your thoughts.
                I'm not even going to bother with it.
                lol

                at least it brought up some good discussion.
                pete


                new owner of
                08 gen2 hayabusa


                former owner
                1981 xs1100 RH (aus) (5N5)
                zrx carbs
                18mm float height
                145 main jets
                38 pilots
                slide needle shimmed .5mm washer
                fitted with v/stax and uni pod filters

                [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

                Comment

                Working...
                X