Tweet
does anyone know where i can find a cheap oil filter bolt. my bike is a 80sg 1100? can you use a oil filter bolt from a smaller xs bike of the same period? I think the yamaha shop wants about 70bucks for one. thanks for any help.
-
1980 xs11sg
16600 miles, soon to be a lot more
stock headers with free flow exhaust
mikes xs pods
#45 pilot jets
#130 main jets on 2 & 3
#125 main jets on 1 & 4 -
Try Andreas Weiss, he's on here and has lots of parts for sale.1980G Standard, Restored
Kerker 4 - 1
850 Rear End Mod
2-21 Flashing LED Arrays on either side of license plate for Brake Light Assist, 1100 Lumen Cree Aux Lights,
Progressive springs, Showa rear shocks
Automatic CCT
1980GH Special, Restored
Stock Exhaust, New Handlebars, 1" Spacer in Fork Springs, Automatic CCT, Showa Rear Shocks
'82 XJ1100 (Sold)
Automatic CCT, RC Engineering 4 X 1 Exhaust, K&N Pods, #50 Pilot Jets, YICS Eliminator. Sorely missed. -
IIRC, They sell them over at the Parts-n-more site.
Yep....
http://www.partsnmore.com/parts/yamaha/xs1100/?filters[category]=engine&filters[fitting]=customLast edited by DGXSER; 11-07-2010, 06:40 PM.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
Just a note of caution using aftermarket filter bolts. There have been a number of cases of the Pressure relief valves jamming in some of the cheapie bolts available so make sure you check for correct operation of the valve before fitting it.79 SF Special W/ Stock all original motor @ 384,000klms
Stock exhaust, stock airbox, XJ sump, 78E carbs, Xs1100RH seat, Bosch superhorns, 5/8ths front M/c, braided lines, sintered SBS pads, drilled discs, progressive springs, 8" 50w HID headlight 4300K, 2 x 50w HID spiral driving lights, KONI shocks, Spade fuse box
*Touring mode - Plexistar 2 screen, Gearsack rack & bag & saddlebags, homebuilt towbar
*"The Keg"- UC torana hubs, XS11 discs, Tokico 4 spot calipersComment
-
I'm pretty sure I have an xtra, if you have trouble.79 XS11 Special (Lazarus)
80 XS850 Special (Old Faithful)
80 XS11 Standard sorta stock (Beatrice)
79 DT 100Comment
-
thanks
thanks for the help guys.1980 xs11sg
16600 miles, soon to be a lot more
stock headers with free flow exhaust
mikes xs pods
#45 pilot jets
#130 main jets on 2 & 3
#125 main jets on 1 & 4Comment
-
Whatsamatter... Bolt head stripped?
Here's what ya do:
1. Go to Tacoma Screw and buy a large, metric nut. Size...? Oh, maybe something that a 17mm socket/wrench would grab.
2. Take oil filter bolt, large nut and a six pack of good beer (Let's not be cheap here with the bribe) and go to Zigler Welding downtown, (322 Capitol Way) or go to anyplace that makes trailer hitches and such.)
3. Place the 6 pack on the counter... then place the large nut over the stripped bolt head and ask the counter guy if they could please fill in the hole with 'filler rod'.
4. You now will have an oil filter bolt with a head that won't strip.
(Make sure to remove the O-ring prior to welding. Might melt, ya know)"Damn it Jim, I'm a doctor, not a mechanic!' ('Bones' McCoy)Comment
-
Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
Hey, I used to go to Tacoma Screw when I needed oddball fasteners that I couldn't find anyplace else. Then I moved to a bigger town, that doesn't have anyplace like that.Originally posted by prometheus578 View Post
Cy
1980 XS1100G (Brutus) w/81H Engine
Duplicolor Mirage Paint Job (Purple/Green)
Vetter Windjammer IV
Vetter hard bags & Trunk
OEM Luggage Rack
Jardine Spaghetti 4-2 exhaust system
Spade Fuse Box
Turn Signal Auto Cancel Mod
750 FD Mod
TC Spin on Oil Filter Adapter (temp removed)
XJ1100 Front Footpegs
XJ1100 Shocks
I was always taught to respect my elders, but it keeps getting harder to find one.Comment
-
This is where I go, they have nice stuff...lol
2H7 (79)
3H3
"If it ain't broke, modify it"
☮Comment
-
Of course I'm fixing my potential filter bolt problem by installing a SOFA during my next oil change. Then I won't have to worry about it again.
Cy
1980 XS1100G (Brutus) w/81H Engine
Duplicolor Mirage Paint Job (Purple/Green)
Vetter Windjammer IV
Vetter hard bags & Trunk
OEM Luggage Rack
Jardine Spaghetti 4-2 exhaust system
Spade Fuse Box
Turn Signal Auto Cancel Mod
750 FD Mod
TC Spin on Oil Filter Adapter (temp removed)
XJ1100 Front Footpegs
XJ1100 Shocks
I was always taught to respect my elders, but it keeps getting harder to find one.Comment
-
Tacoma
Well this reminds me of two things.Originally posted by prometheus578 View Post
One of the early loves of my life lived in Tacoma. Her name was Jamie, rode bikes. She would be about sixty now.
While looking at the POs receipts I noticed a work order that said the oil filter bolt was stripped.
Do not know for sure that it was fixed, other than the bike does not drip oil.
I guess I will find out.
CrustyComment
Comment