Uni-joint replace number

[Rasputin]

I took the u-joint down there and I took the yoke. We measured it up and compared it to the one they have in stock. I dont recollect the exact difference but it was not enough that I would be afraid to use it. .00 something kinda difference. They also told me it crossed to a 392 which is made by progressive I think. Could be another manufacturer that starts with a letter P and I just have progressive on my mind though, but the number is the same.

[Steptoe]

lets see

Mr big,, $168 is for the yoke & joint as you know which is why I started hunting else where,, shipping across the "pond" wouldn't be that much.

B WALKER 5,, I don,t get it, external measurements are from outside to outside, so measuring from anywhere else won,t be fine.

[ there is a poofteenth of clearance because the clips are a slide fit not a press fit]

the joint I got slipped straight in, no shims, centred exactly,,,,, I have tagged this as uni/cross joint,,if needed I can get them & ship to where needed when needed, I'll buy a couple & keep them here for later.

[b.walker5]

B WALKER 5,, I don,t get it, external measurements are from outside to outside, so measuring from anywhere else won,t be fine.

Simple enough, some manufacturers measure from inside to inside and dont include groove width. So if the groove / clip width is 2.5mm and the internal measurement is 35mm then the total is 40. Bought one today for 32 bucks, even though I dont need it (never hurts to have spares on hand). Measures perfectly to 40mm, including groove width. Matsuba UJ-112. Direct Cross from Koyo UJ N2057, which is the original part. Half the price of the 901004 in this part of the world. To you guys in the states, Neapco 1-0028 is what you want.

Might be time we started compiling a list of aftermarket parts, numbers and suppliers for our bikes that can be posted as a tech tip.

[Steptoe]

not a bad idea

might take some working out though, as we have just found out .
a part number "down under" obviously doesn't work up "on top"

but it certainly might be worth a look by admin guys

[DAVINCI]

Supplier here...

http://www.theujointstore.com/yamaha...-u-jo1100.html

The U-Joint Store.

[James England]

http://www.theujointstore.com/yamaha...-u-jo1100.html

The U-Joint Store.

Nice one. Exactly what was needed