If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The photo that "bug" posted IS the correct fairing, lowers, and bags. I did NOT get the Yamaha box, as it seemed "to small" for my needs. My '78 had a "Harley" box on it. I DID rattle can it with "Macho Maroon" to match the rest of the bike. I did have a pic around someplace, but it may take me a while. The mount for the fairing had a lower bar bolted to the bosses in the down tubes, and an upper mount bolted to the steering head. It also had a mount that went to the front of the fairing to steady it.
The nice part was that the fairing was MUCH better at cutting through the wind than a Vetter!! I've had over ten miles an hour more top speed with the pacifico than a vetter!
Ray Matteis
KE6NHG
XS1100 E '78 (winter project)
XS1100 SF Bob Jones worked on it!
The new one is NOT the '78E OEM fairing. It looks like a yamaha for an 850, or a Special built by Pacifico. They didn't get too many out because of a fire in the early 80's, IIRC. The picture "bug" posted IS the correct '78 fairing. The photo XSrunner posted is also the correct fairing and lowers for the '78.( and a NICE looking example at that!!!)
Ray Matteis
KE6NHG
XS1100 E '78 (winter project)
XS1100 SF Bob Jones worked on it!
Comment