First I needed to repair long deep dent on lefthand side. After trying a couple things, I ended up cutting out that whole section to hammer out on the ground and re-weld back on.
Layer of JB Weld applied with bondo spreader, sealed any remaining pinholes and smoothed dents out a little--but I got the metal pretty straight and holes welded well beforehand.
side holes I cut...
just wait till I'm done
Layer of JB Weld applied with bondo spreader, sealed any remaining pinholes and smoothed dents out a little--but I got the metal pretty straight and holes welded well beforehand.
side holes I cut...
just wait till I'm done
Comment