Announcement

Collapse
No announcement yet.

Aaaaaaarrrrrgggghhhhh!!!!!!!!!1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aaaaaaarrrrrgggghhhhh!!!!!!!!!1

    ok. if anyone can help me I would love you forever. I just put a newer motor on my 78' put the original carbs back on and to my dismay feul is leaking out of all four pod filters. to paint the picture, there is one hose running from the petcock to boot #2 and one hose running to boot #3. one hose goin from petcock to the forward connecter inbetween 2 and 3 and one goin to 3 and 4. but I cant figure out what the rear hose connectors are.
    1978 XS1100E 81' motor
    ratted out piece of lightnin. yeah.!

  • #2
    check this thread ...see if it helps

    http://www.xs11.com/forum/showthread...t=octy+diagram
    2-79 XS1100 SF
    2-78 XS1100 E Best bike Ever
    80 XS 1100 SG Big bore kit but not fully running yet.
    Couple of more parts bikes of which 2 more will live!

    Comment


    • #3
      Thats an awsome diagram but I dont have one of those octopus'
      1978 XS1100E 81' motor
      ratted out piece of lightnin. yeah.!

      Comment


      • #4
        Hey Bobber,

        Okay, the 2 vacuum hoses from the back/inside of the petcocks to the intake manifolds is to make the petcocks flow on your Standard 78E. CHECK!

        The LOWER "T" fittings on the carbs next to the float bowls are the fuel inlets! The UPPER....which I'm assuming you mean by FORWARD "T" fittings are ONLY VENTS for the bowls, and are to be connected to just hoses, "T'd" together but left to VENT!!!
        IF you have fuel lines connected to them, that's why it's flooding out!
        T.C.
        T. C. Gresham
        81SH "Godzilla" . . .1179cc super-rat.
        79SF "The Teacher" . . .basket case!
        History shows again and again,
        How nature points out the folly of men!

        Comment


        • #5
          Like TC sez, you can't plug the air vent hoses!

          Originally posted by TopCatGr58
          Hey Bobber,

          Okay, the 2 vacuum hoses from the back/inside of the petcocks to the intake manifolds is to make the petcocks flow on your Standard 78E. CHECK!

          The LOWER "T" fittings on the carbs next to the float bowls are the fuel inlets! The UPPER....which I'm assuming you mean by FORWARD "T" fittings are ONLY VENTS for the bowls, and are to be connected to just hoses, "T'd" together but left to VENT!!!
          IF you have fuel lines connected to them, that's why it's flooding out!
          T.C.
          Skids (Sid Hansen)

          Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

          Comment


          • #6
            newer motor

            What year motor did you get?


            mro
            BTW, there are two ports on the front of the E's air box for the vent hoses from the carbs.

            Comment


            • #7
              Hi Bobberbetty,
              as I understand your post, the carbs and their fuel connections are the same as on the old engine? Did the carbs leak before you swapped in a different engine? It's all the same stuff that was there before?
              It must have been something you hooked up wrong.
              Fred Hill, S'toon
              XS11SG with Spirit of America sidecar
              "The Flying Pumpkin"

              Comment


              • #8
                ok I figured out the problem. I did have the hoses hooked up wrong. so I swapped them and it fixed the issue.

                thanks for all your help guys.
                1978 XS1100E 81' motor
                ratted out piece of lightnin. yeah.!

                Comment

                Working...
                X