Alternative (CARB)

[xschop]

instant power

Hey Genius, this is some really good fluff, you are on your way to a true endowment of Guruship

[geniusloerts]

hahaha

and weld the clutch plates together....lol


what about a turbine?as in jet powered?

http://www.youtube.com/watch?v=4EZJkwWHQ8M


hehe

[xschop]

dream time

I'm all fluffed out, Time to go dream about the 1200 kit with some better carbs....sleep tight kids

[geniusloerts]

i have been thinking about my XJ that i have sitting in the shop and how the XJ's have the YICS and those ports that run between each cylinder and how there happend to be the holes convenantly there....

some have talked about putting nitrous nozzles there, but i have thught about port fuel injection with a tunable ECU and turbo setup.would only need the intake manifolds for boosted air....

[xschop]

allright 1 more

It wouldn't be difficult to make an 1-4 intake manifold for a single carb/throttle body. I still haven't welded up my Vegas Tank fuel pump port either....ok nighty nite....

[GARTHXS]

sign me up

So is anyone going to make this intake I would like one just think , no sync just jetting, mix and haul azz

[xschop]

which carb

the intake wouldn't be difficult to make, just figuring which carb would work

[GARTHXS]

which carb

how about a weber

[xschop]

engineering problem discussed

http://www.jockeyjournal.com/forum/a...p/t-14258.html

[Grimace]

I was thinking about this for mine.

http://www.webercarbsdirect.com/45_DCOE_p/19600.060.htm

Manifold would be relatively easy to make. Just 4 tubes attaching to a mixing chamber with the carb flange welded in the middle. You may have to baffle the intake to equalize air/fuel ratio to each cyl, but that isn't mind boggling.

[snowdog51]

single

chev 350 headers 8 weber carbs makes about 450-475 hp why one carb one intake is best for reasons we all know
as ever bill