Changing handlebars and the MC

[wapam]

The MC base is angled to remain level on the buckhorn handlebars. Would changing to a flatter bar mess up the MC as it would not sit level on "flatter" bars.

Hope that made sense.

Thanks.

[DiverRay]

That is correct. It "should" still work, but may be harder to fill. The second option would be buy a "new" unit, designed for the normal bars.

[Dsxs11]

Mine works fine on drag bars. and it's sits pretty flat. I do have to turn the bars to the left to fill it.

[81xsproject]

Mine worked fine on super bike bars (before I changed it out).

[bikerphil]

mc

I have CB750 bars on my 79SF and the master sits at an angle but still works fine. I just turn the bars all the way to the left while on sidestand to remove cap and fill. That levels it out. You shouldn't have a problem. HTH>

[TADracer]

Mine works fine on my 2 1/2" rise bars. To fill or blead I turn the bars to the left and loosen the bolts a bit to rotate the MC to a relatively flat position. Simpe.