Tweet
The MC base is angled to remain level on the buckhorn handlebars. Would changing to a flatter bar mess up the MC as it would not sit level on "flatter" bars.
Hope that made sense.
Thanks.
Hope that made sense.
Thanks.
-
-
That is correct. It "should" still work, but may be harder to fill. The second option would be buy a "new" unit, designed for the normal bars.Ray Matteis
KE6NHG
XS1100 E '78 (winter project)
XS1100 SF Bob Jones worked on it! -
Mine works fine on drag bars. and it's sits pretty flat. I do have to turn the bars to the left to fill it.I hate signatures. Too many cars and Bikes to list here.Comment
-
Mine worked fine on super bike bars (before I changed it out).'81 XS1100 SH
Melted to the ground during The Valley Fire
Sep. 12th 2015
RIPComment
-
mc
I have CB750 bars on my 79SF and the master sits at an angle but still works fine. I just turn the bars all the way to the left while on sidestand to remove cap and fill. That levels it out. You shouldn't have a problem. HTH>2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
-
Mine works fine on my 2 1/2" rise bars. To fill or blead I turn the bars to the left and loosen the bolts a bit to rotate the MC to a relatively flat position. Simpe.Mike Giroir
79 XS-1100 Special
Once you un-can a can of worms, the only way to re-can them is with a bigger can.Comment
Comment