If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think you might find it a little long that way. I used a 1/8" X 90 degree fitting with a guage that has a fitting on the back instead of the side. Should work otherwise.
You can't stay young forever, but you can be immature for the rest of your life...
'78E "Pathfinder" Show bike...
Lovingly restored by Dave Delzell
Drilled airbox
Tkat fork brace
Hardly mufflers
late model carbs
Newer style fuses
Oil pressure guage
Custom security system
Stainless braid brake lines
Well, whatever the cost will do. How about $100? LOL Actually I will make you one for $20 + $5 for packing and shipping.... If you want the guage and 90 degree fitting too, it's another $9... The adaptor is stainless steel.
You can't stay young forever, but you can be immature for the rest of your life...
'78E "Pathfinder" Show bike...
Lovingly restored by Dave Delzell
Drilled airbox
Tkat fork brace
Hardly mufflers
late model carbs
Newer style fuses
Oil pressure guage
Custom security system
Stainless braid brake lines
Comment