Announcement

Collapse
No announcement yet.

Oil light problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Couldn’t I just take the bolt out and fit this



    As long as it doesn’t go over the oil feed inside??


    Thanks Andy

    Comment


    • #17
      No, Andy, the threads inside that hole don't begin until about an inch into the hole, and you WILL cover up the tranny oil feed. Pull the existing banjo bolt and you'll see what I mean.

      Comment


      • #18
        Additionally

        There is a small hole in the center to limit the oil to the tranny should something come loose in there so it don't starve the bottom end should a large leak develope in there.



        Last edited by planedick; 03-25-2008, 06:56 PM.
        You can't stay young forever, but you can be immature for the rest of your life...

        '78E "Pathfinder" Show bike...
        Lovingly restored by Dave Delzell
        Drilled airbox
        Tkat fork brace
        Hardly mufflers
        late model carbs
        Newer style fuses
        Oil pressure guage
        Custom security system
        Stainless braid brake lines

        Comment


        • #19
          Re: Additionally

          Hi planedick

          Please could you let me know how much you would charge to make one of these for me

          Originally posted by planedick

          [/B]
          Thanks Andy

          Comment


          • #20
            Adapter cost

            The Stainless material costs about $4.50, $10 for machining, the guage is $8.20 and the 90 degree fitting probably around $1.50 which adds up to $24.20. Probably more than you want to pay for an oil pressure guage. I will make the pictured part (adapter only) for $15 and you can find a guage and 90 degree fitting. The other option is to get an electronic gauge for the dash and put a "T" fitting where the oil pressure light sending unit is, install the sending unit there and have a dash mount guage. JC Whitney has a nice selection of guages.
            You can't stay young forever, but you can be immature for the rest of your life...

            '78E "Pathfinder" Show bike...
            Lovingly restored by Dave Delzell
            Drilled airbox
            Tkat fork brace
            Hardly mufflers
            late model carbs
            Newer style fuses
            Oil pressure guage
            Custom security system
            Stainless braid brake lines

            Comment


            • #21
              Hi Andy,

              How about a BSP tee piece into the hole for the switch, then the switch and gauge into the tee?

              Not as "profesional" as planedick's solution, but quicker and cheaper.

              AlanB
              If it ain't broke, modify it!

              Comment


              • #22
                Thanks Alan

                But I like the "professional" look of the gauge out the side of the engine

                planedick

                I Have already got a gauge, What would the shipping be to the uk for the adapter?

                Thanks

                Andy

                Comment


                • #23
                  Shipping

                  I don't have a clue what it costs to ship it to the UK, I will go to the PO and ask.
                  You can't stay young forever, but you can be immature for the rest of your life...

                  '78E "Pathfinder" Show bike...
                  Lovingly restored by Dave Delzell
                  Drilled airbox
                  Tkat fork brace
                  Hardly mufflers
                  late model carbs
                  Newer style fuses
                  Oil pressure guage
                  Custom security system
                  Stainless braid brake lines

                  Comment


                  • #24
                    Thanks

                    Andy

                    Comment


                    • #25
                      Ship to UK

                      Andy, the Post Office says regular mail to UK for that would be about $5
                      You can't stay young forever, but you can be immature for the rest of your life...

                      '78E "Pathfinder" Show bike...
                      Lovingly restored by Dave Delzell
                      Drilled airbox
                      Tkat fork brace
                      Hardly mufflers
                      late model carbs
                      Newer style fuses
                      Oil pressure guage
                      Custom security system
                      Stainless braid brake lines

                      Comment


                      • #26
                        Planedick


                        Sounds good to me

                        How do you want payment?

                        Would you take paypal?


                        Andy

                        Comment


                        • #27
                          Paypal

                          I'm sure I have paypal, as I have sent money on E-bay, but they make it so automatic I have no idea how to use it outside of e-bay. Am I supposed to request payment or what????? I'll need an addy too. Also I need to make it yet.... Tomorrow is full, but I can probably get at it on Wednesday....
                          Dick
                          You can't stay young forever, but you can be immature for the rest of your life...

                          '78E "Pathfinder" Show bike...
                          Lovingly restored by Dave Delzell
                          Drilled airbox
                          Tkat fork brace
                          Hardly mufflers
                          late model carbs
                          Newer style fuses
                          Oil pressure guage
                          Custom security system
                          Stainless braid brake lines

                          Comment


                          • #28
                            Plandick

                            I will pm you my address

                            can you pm me your paypal acc details and I will send the $

                            Thanks

                            Andy

                            Comment


                            • #29
                              Paypal

                              I went to the paypal site and found I need your e-mail addy to send an invoice to you. Got your snail addy OK.
                              You can't stay young forever, but you can be immature for the rest of your life...

                              '78E "Pathfinder" Show bike...
                              Lovingly restored by Dave Delzell
                              Drilled airbox
                              Tkat fork brace
                              Hardly mufflers
                              late model carbs
                              Newer style fuses
                              Oil pressure guage
                              Custom security system
                              Stainless braid brake lines

                              Comment


                              • #30
                                Dick

                                PM


                                Andy

                                Comment

                                Working...
                                X