Announcement

Collapse
No announcement yet.

charging system

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • charging system

    Eh,
    my tach is working but the bike is not charging?does this mean the regulator is dead?
    82 XJ1100 Maxim
    80 XS1100 engine and parts doner
    Awsome machine.....love going on rides.....
    black on black

  • #2
    Hi Fred

    You can test that regulator pretty easy do a search from the top of the page its been discussed several times .Its hard to say exactly for sure if its bad It needs to be tested tho to eliminate
    other problems

    Comment


    • #3
      http://www.xs11.com/forum/showthread...ting+regulator

      Fred check out this thread

      Comment


      • #4
        How do you know it's not charging?

        Think I've read that the XJ generator uses "brushes".
        If one sticks or there to worn can cause problems.


        mro

        Comment


        • #5
          Don't go chasing your tail if you really have a bad battery. They can fool you!
          Skids (Sid Hansen)

          Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

          Comment


          • #6
            when the green wire is disconnected its voltage raises to bat....
            when connected it stays at .78?
            between brown and green...4.5 ohms...
            between all white wires ....9 ohms
            82 XJ1100 Maxim
            80 XS1100 engine and parts doner
            Awsome machine.....love going on rides.....
            black on black

            Comment


            • #7
              easy test

              right side cover off
              Start bike
              multi-meter pos leed to pos post on selinoid
              black lead to ground (frame)
              2500/3000 rpm should have about 14V

              if less may have trouble in XJ land

              Had just read a thread this morning relating to XJ charging system and now can't find it. Geezer pointed the way to trouble shoot it very well.

              Basic trouble shooting click here (Geezers site)
              http://www.oregonmotorcycleparts.com/FAQ.html


              mro

              Comment


              • #8
                thanks for your help...
                turned out to be the stator?.....
                works now....!
                82 XJ1100 Maxim
                80 XS1100 engine and parts doner
                Awsome machine.....love going on rides.....
                black on black

                Comment

                Working...
                X