Signaling for help

[xschop]

1 that actually does what it says... K&S

just have to switch the two hot leads at the plastic housing and plug this one right in...Had on two years in rain/carwash, no problems. Maximan got a close up and demo....

[81xsproject]

YEAH!!!!

WAHOOOOOOOOOOOOOOOOOOOO!!!

YES! YES! YES! YES! We have BLINKING!!!

I am SO happy! I figured it out Long story short, the plug was switched by a PO so that GROUND was actually pos and DRIVE was nothing (not ground, not pos, not light). Once wired correctly, the first electronic flasher worked (flashing very fast) and the electro magnet one like TC's would work if I put a regular bulb in line for a little load.

I think I will use that one for either my buddies kz or install a inline bulb and use it for the hazards.

Thank you every for your help on what was all really bad wire testing on my part. I knew it had to be something I was overlooking or doing wrong. Again,

thanXS