Ok so I'm happy to report my bike is alive again. I bought it in august and it was working fine then so I didn't want to screw anything up by tinkering with. I have no mech experience. so when bike died I had no choice but to go in there. this is a list of stuff I've done since it died...
Carbs were cleaned in ultrasonic cleaner
every jet was inspected for blockages and cleaned
Float levels set to manual specs 24mm
O-ring on needle jet z2 replaced
Bench synced butterflies
replaced old wet battery to agm battery (13+ on multimeter now)
oil changed, oil filter and gasket replaced,
new crushed washers for oil plug (forgot to inspect strainer )
new spark plugs and put dielectric grease in plug caps
cleaned air filters in soapy water
This took about 2 months of researching online, ordering parts from dealer, ebay, mikesxs, but I'm much happier with how the idle is now. Shoot, I was thrilled just to hear the bike start!
Exclusive video... world premier....
http://www.youtube.com/watch?v=gJlCcKxumMw
Carbs were cleaned in ultrasonic cleaner
every jet was inspected for blockages and cleaned
Float levels set to manual specs 24mm
O-ring on needle jet z2 replaced
Bench synced butterflies
replaced old wet battery to agm battery (13+ on multimeter now)
oil changed, oil filter and gasket replaced,
new crushed washers for oil plug (forgot to inspect strainer )
new spark plugs and put dielectric grease in plug caps
cleaned air filters in soapy water
This took about 2 months of researching online, ordering parts from dealer, ebay, mikesxs, but I'm much happier with how the idle is now. Shoot, I was thrilled just to hear the bike start!
Exclusive video... world premier....
http://www.youtube.com/watch?v=gJlCcKxumMw
Comment