Ok so I'm happy to report my bike is alive again. I bought it in august and it was working fine then so I didn't want to screw anything up by tinkering with. I have no mech experience. so when bike died I had no choice but to go in there. this is a list of stuff I've done since it died...
Carbs were cleaned in ultrasonic cleaner
every jet was inspected for blockages and cleaned
Float levels set to manual specs 24mm
O-ring on needle jet z2 replaced
Bench synced butterflies
replaced old wet battery to agm battery (13+ on multimeter now)
oil changed, oil filter and gasket replaced,
new crushed washers for oil plug (forgot to inspect strainer
)
new spark plugs and put dielectric grease in plug caps
cleaned air filters in soapy water
This took about 2 months of researching online, ordering parts from dealer, ebay, mikesxs, but I'm much happier with how the idle is now. Shoot, I was thrilled just to hear the bike start!
Exclusive video... world premier....
http://www.youtube.com/watch?v=gJlCcKxumMw
Carbs were cleaned in ultrasonic cleaner
every jet was inspected for blockages and cleaned
Float levels set to manual specs 24mm
O-ring on needle jet z2 replaced
Bench synced butterflies
replaced old wet battery to agm battery (13+ on multimeter now)
oil changed, oil filter and gasket replaced,
new crushed washers for oil plug (forgot to inspect strainer

new spark plugs and put dielectric grease in plug caps
cleaned air filters in soapy water
This took about 2 months of researching online, ordering parts from dealer, ebay, mikesxs, but I'm much happier with how the idle is now. Shoot, I was thrilled just to hear the bike start!
Exclusive video... world premier....
http://www.youtube.com/watch?v=gJlCcKxumMw
Comment