If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
anyone know how to derestrict
a kawa er5, my mate has one that runs
like a dog thats been restricted.
tia
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
"The restriction kit uses discs with small holes in them, like large washers. Placed between the carbs & the engine, these limit the amount of mixture that can be drawn in. Getting these out will involve moving the carburettors so that you can reach into the inlet stubs. I'd check the list of things Simon suggested first! Also check the carb breather hose which passes under the rear of the fuel tank. Make sure it isn't pinched or too near the airbox inlet."
thanks Ken,
I did a little more looking and found
the way to do it.
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
hey fred,
havent done it yet, probably in the next couple of days,
apparently its a large washer inserted into the carb boots,
so once theyve been removed the bike should be sweet,
atm while its restricted, i have no idea how he rides it, its
got no balls and vibrates.
ill let you know how it goes after ive removed them.
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
Comment