Shinko tire travesty

[jjz28]

I almost bought the George fix seals today as they state they are the same size. I don't deal with ebay much but I want a windshield to and am going to use the bill me later option and it needs to be over $99 to get no interest for 6 months so I want to be sure which shield to order and I order that and my seals together so I wont have any interest. But I will be getting these seals from him, they are the right measurements. Thanks guys for the links.

[jjz28]

I fell bad for hijacking this thread,, sorry. SO, my seals should be shipped out today and get them this week. Does anyone know of a good source to get the whole valve that screws into the cap? Not just a schraeder valve but the hole thing. Mine are buggerd up a little on the inside lip and i would like to replace them with new ones. Thanks again.

[Bonz]

So the brass valve body itself, that the schraeder valve core screws into? What is the damage on the inside lip you refer to? Is the damage on the brass body threads where it screws into cap or the hole the valve screws into?

[jjz28]

its on the inside lip and when you pump it up, its hard for the air pump to get in there right. The hole is out of round and i bent it back a lot but i just want new ones. Funny thing is, the caps screw right on. They function right, i just want some new ones.

[Bonz]

Gotcha. Put an ad in the wanted section of the forum, shoud get some responses pretty quick.

[BA80]

its on the inside lip and when you pump it up, its hard for the air pump to get in there right. The hole is out of round and i bent it back a lot but i just want new ones. Funny thing is, the caps screw right on. They function right, i just want some new ones.

http://www.partzilla.com/parts/detai...190-00-00.html

[jjz28]

http://www.partzilla.com/parts/detai...190-00-00.html

$30, I think I'll keep the ones i have. Thanks for the link though.

[Bonz]

That's why I said to post up in the wanted section and didn't post a link to a new one... now that the price is out there on this thread I don't know if you might find a good guy deal on the forum or not...

Many guys will probably step up to offer you one at a fair price if you post up in the wanted section.

[BA80]

That's why I said to post up in the wanted section and didn't post a link to a new one... now that the price is out there on this thread I don't know if you might find a good guy deal on the forum or not...

Many guys will probably step up to offer you one at a fair price if you post up in the wanted section.

jjz28 said he wanted new ones, those are new ones. It ain't a secret.

[Bonz]

I'm just razzing a bit... I took it to mean he wanted one that was new in the sense of being undamaged to replace what he has, and could tell from the price for a new one that was probably gonna be his reaction, and it was.

Good post BA80!

[BA80]

I figured giving the man the info he requested would be......Thanks!

[jjz28]

I didn't think they would be that high. Mine work fine, as far as keeping air in. Just where the hole is out of round its harder to get the air pump on them. Thanks for the help guys.

[Bonz]

As long as you can get air in them, and the air stays in them, you are not unlike most of us on this forum that have some part or piece on their bike that may not look good, but it works!

[GLoweVA]

I fell bad for hijacking this thread,, sorry. SO, my seals should be shipped out today and get them this week. Does anyone know of a good source to get the whole valve that screws into the cap? Not just a schraeder valve but the hole thing. Mine are buggerd up a little on the inside lip and i would like to replace them with new ones. Thanks again.

Hey Jeff, here's my thread from last year about my air valves.

http://www.xs11.com/forum/showthread.php?t=37672&highlight=fork+air+valve

Nice pics too.

[Bonz]

This thread has morphed around a bunch, so what's up next for discussion fella's?