need clutch help

[bandet01]

well yesterday was a ok day to take the bike out and hot rod it alittle bit. well got it all warmed up and took off rode a few miles and i notiaced that the clutch was not having to be pulled in to shift i could just let out of the gas a shift it does this mean my clutch is all out of adjustment or is my clutch in need of replacement this spring before i go race it and i f so where can i get a whole new clutch and springs. and the clutch was slipping last season but some guys helped me out and got it adjusted but i did plan on replacing the clutch and the springs this year because even after we got it adjusted i think it had a little slip in it since i could never get over 100 in the quater and i think i should of been over 100 easy

[DiverRay]

The XS1100 can be shifted without the clutch, but it's NOT a good idea. The clutch will "soften" the hit as you change gears, and allow them to last longer.
I put new "heavy duty" springs in my clutch, and it helped a LOT. The pull is a little heavyer, but I don't slip at 6K in third any more. For drag racing, the heavy springs are a MUST.
Ray

[pggg]

With strong springs and added plate my clutch was so stiff it felt like the cable was gonna snap but the clutch felt nuclear bombproof. After a few weeks ridin', my left forearm was HULK like and the clutch was easy to use.

[bandet01]

well i want a strong clutch so i know that i am getting all the power to the ground and so i can get that mid 12 second pass that i want to get out of this bike before i do any major mods to it

i mean all i am going to do this winter even though winter is about over is

put a new exhaust system on the bike
put new coils on it
rejet the and redo the carbs
and finsh painting it

[bandet01]

where are some good places to get a whole clutch setup and new springs

[andreashweiss]

I have one complete clutch left will throw in the misc clutch plates and washers left from another one.Mostly fiber plates,no metal ones. This will be a stock clutch unassembled in the basket including shipping $30.00 andreashweiss@yahoo.com

[bandet01]

so is this a new setup or a used one i mean i need a good clutch that can take some abuse i drag race the bike at the track alot