while my gas tank gently seeps

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JeffH
    replied
    Looking Great ........... nice fix

    At least now I don't have to worry about seeing a big fire ball in my rear view mirror.
    Heck, with that new Go Fast 78' Macho Maroon tank now we can follow you.

    J

    Leave a comment:


  • speedlimit85
    replied
    Yea. I rinsed it out with gas to get particles of rust out. One petcock was leaking, so I swapped gaskets and sanded the surface. now it's dry.

    It was a tighter fit to install. Looks like original 78 macho maroon, pretty clean from rust and damage.

    Leave a comment:


  • bikerphil
    replied
    Nice, I told you it would be faster

    How does it look overall, pretty solid?

    Leave a comment:


  • speedlimit85
    replied
    A little faster. Click image for larger version

Name:	P1010001 (37).jpg
Views:	7
Size:	150.2 KB
ID:	892029 Click image for larger version

Name:	P1010002 (28).jpg
Views:	7
Size:	150.3 KB
ID:	892030

    Leave a comment:


  • bikerphil
    replied
    Yep, my friend Cobia (RIP) had the exact same tank and he tried to patch it like you did and it didn't work out. He used the tank sealer in the back of the tank only and it was good after that. I can't remember the sealer he used, I want to say POR 15 but I can't be sure.
    Last edited by bikerphil; 11-14-2026, 02:42 PM.

    Leave a comment:


  • speedlimit85
    replied
    I should still repair this tank. It is leaking through or near the putty. I slowed it down. The tank sealer, jb weld are good products that work. most failures are probably user error. The tank sealer/liner has to be done just right. I may try it or get help to do it.
    I did a thorough job wth th jb tankweld, let it set overnight. Maybe I missed a pinhole or didn't adhere it ti the metal enough in a spot that needed it?

    Leave a comment:


  • bikerphil
    replied
    Nice, well that should solve the problem, looks good.

    Macho Maroon is the fastest of all the colors
    Last edited by bikerphil; 11-13-2026, 09:01 PM.

    Leave a comment:


  • speedlimit85
    replied
    https://www.ebay.com/itm/30716272581...9HYpWpZvaS9-Sw

    got this one

    Leave a comment:


  • bikerphil
    replied
    The seam should be an relatively easy repair with a high watt soldering gun, done that before with good results.

    Leave a comment:


  • speedlimit85
    replied
    Click image for larger version

Name:	P1010002 (27).jpg
Views:	41
Size:	125.6 KB
ID:	892020seeping out maybe from another spot. the shop said he could repair the edge seam .. I don't know

    Leave a comment:


  • bikerphil
    replied
    Originally posted by Schming
    Fuel tanks will not pass customs for over sea shipping. BTDT
    I never realized that. That's too bad

    Leave a comment:


  • bikerphil
    replied
    It's OK like that, it's a vent, it should point upward and hooks to nothing.

    Leave a comment:


  • speedlimit85
    replied
    Click image for larger version

Name:	P1010001 (35).jpg
Views:	50
Size:	116.5 KB
ID:	892016small hose going to the back below the crank breather maybe out of middle drive goes upto nothing ok or not ok?

    Leave a comment:


  • Schming
    replied
    Fuel tanks will not pass customs for over sea shipping. BTDT

    Leave a comment:


  • bikerphil
    replied
    It's 6.3 gallon, the inside looks pretty clean, the picture of the inside shows shiny metal, maybe a tiny amount of flash rusting which wouldn't be a deal breaker. I would run it with a fuel filter anyway which would catch anything. It's pretty normal for some flash rusting to occur with it sitting dry.
    Last edited by bikerphil; 11-12-2026, 06:13 AM.

    Leave a comment:

Working...