That's a 6 gallon tank? Nice, but mine has no visible rust inside. That color might work with mine. And it comes with the rubber grommet.
Would that tank need to be cleaned with chemicals and shaking it with bolts to get the rust out?
while my gas tank gently seeps
Collapse
X
-
The U.K. large Standard tank, very tempting...
https://motorize-shop.com/products/yamaha-xs-1100-2h9-1978-tank-petrol-tank?gad_source=1&gad_campaignid=23873596926&gclid =Cj0KCQiAwdDXBhDuARIsAFdLukkkdIqwtWZbsSmO9Bb0hWt27 3ZwosOMgiuJM5BJBoCEuGDjw4UEOscaAmivEALw_wcB
Last edited by bikerphil; 11-11-2026, 09:19 PM.Leave a comment:
-
Keep it simple, cover up the leaky spot with JB Weld and hit the road again.Leave a comment:
-
Yep, that's the place I mentioned, under the bracket. You could try some kind of patch on the exterior, but I think some tank liner in just that section of the tank would be the way to go.
Or you could replace the tank but these Standard tanks are getting harder to find, and can be pricey. May be a good time to upgrade to the larger capacity Venturer tank if you can find one. Just thinking out loud here.
Last edited by bikerphil; 11-10-2026, 06:32 AM.Leave a comment:
-
If you can see the hole, you should be able to use a soldering iron. DO NOT use a torch. Maybe someone will chime in on a good tank liner to use. If the hole is under the mounting bracket, the tank liner would be a good option.Last edited by bikerphil; 11-09-2026, 09:29 PM.Leave a comment:
-
It is. I stripped the tank ( gonna brake a g string). what kind of internal tank liner?Leave a comment:
-
I've seen a leak on an 80 Standard, it was coming from the seam on the bottom center of the tank underneath the welded on mounting tab. The fix was to use a small amount of internal tank liner only in the rear with the tank tilted upright to let it cure. I hope that isn't the case for you.Last edited by bikerphil; 11-08-2026, 08:21 PM.Leave a comment:
Leave a comment: