while my gas tank gently seeps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • speedlimit85
    XStremely XSive
    • Jan 2017
    • 490
    • Gainesville, Fl.

    #61
    Click image for larger version

Name:	P1010001 (39).jpg
Views:	0
Size:	112.1 KB
ID:	892054better.....
    80 G

    Comment

    • cajun31
      Moderator
      • Oct 2003
      • 2013
      • Brandon, MS

      #62
      Most radiator shops will clean and seal gas tanks. I did one years ago. Of course back then the price was reasonable. The only thing to be sure of is to ask them about the process and what products they use.
      Last edited by cajun31; 11-20-2026, 06:14 PM.
      2 - 80 LGs bought one new
      81 LH
      02 FXSTB Nighttrain
      22 FLTRK Road Glide Limited
      Jim

      Comment

      • bikerphil
        Master of XSology
        • Jan 2008
        • 8958
        • South Flori-DUH

        #63
        Just fooling around with the o ring for this, and it appears that a round o ring of the correct size would work, and no need for the fancy $$ unit. For sure the bolts will need the fiber washers.

        Click image for larger version  Name:	IMG_20261120_203504.jpg Views:	0 Size:	196.6 KB ID:	892057
        Click image for larger version  Name:	IMG_20261120_203216.jpg Views:	0 Size:	194.9 KB ID:	892058
        2H7 (79) owned since '89
        3H3 owned since '06

        07 Triumph Tiger 1050 (night rider)

        "If it ain't broke, modify it"

        ☮

        Comment

        • speedlimit85
          XStremely XSive
          • Jan 2017
          • 490
          • Gainesville, Fl.

          #64
          Gasket is arriving today. I'll have to see the new one compared to the old one set in there. And I'll check radiator shops or try to seal the original tank. I don't want to let it sit and rust. I could use it or one of y'all could...

          The petcock had a lot of rust particles from the tank. Does the filter on it work ON RES and PRI? That gunk can get on the rubber gasket and cause a seepy leak. I gotta clean it up.
          80 G

          Comment

          • bikerphil
            Master of XSology
            • Jan 2008
            • 8958
            • South Flori-DUH

            #65
            The petcock had a lot of rust particles from the tank. Does the filter on it work ON RES and PRI?
            Yes it does.
            2H7 (79) owned since '89
            3H3 owned since '06

            07 Triumph Tiger 1050 (night rider)

            "If it ain't broke, modify it"

            ☮

            Comment

            • speedlimit85
              XStremely XSive
              • Jan 2017
              • 490
              • Gainesville, Fl.

              #66
              Click image for larger version

Name:	P1010001 (41).jpg
Views:	0
Size:	101.8 KB
ID:	892062Click image for larger version

Name:	P1010002 (32).jpg
Views:	0
Size:	160.7 KB
ID:	892063​Might be okay. Sanded a bit. New gasket. Filled tank rode 30 mi. Needs to sit overnight to be sure after temp and pressure changes.


              A long long time ago in a land far away in NY in the rain. I was riding an 850 and hit reserve so I thought -it was empty. I pushed it til the last hill, front brake, push, gasp, into gas station. Filled it up and found out when the tank was painted they left out reserve.
              80 G

              Comment

              • bikerphil
                Master of XSology
                • Jan 2008
                • 8958
                • South Flori-DUH

                #67
                Yep, if the filter tower is missing, no reserve function.

                The tower on the Special fuel tap comes off rather easily and can get lost or loose somewhere in the tank. The Standards not so much...
                Click image for larger version

Name:	IMG_20261121_203002.jpg
Views:	0
Size:	203.8 KB
ID:	892066
                Last edited by bikerphil; Yesterday, 06:47 PM.
                2H7 (79) owned since '89
                3H3 owned since '06

                07 Triumph Tiger 1050 (night rider)

                "If it ain't broke, modify it"

                ☮

                Comment

                • cajun31
                  Moderator
                  • Oct 2003
                  • 2013
                  • Brandon, MS

                  #68
                  Originally posted by bikerphil
                  Just fooling around with the o ring for this, and it appears that a round o ring of the correct size would work, and no need for the fancy $$ unit. For sure the bolts will need the fiber washers.

                  Click image for larger version Name:	IMG_20261120_203504.jpg Views:	0 Size:	196.6 KB ID:	892057
                  Click image for larger version Name:	IMG_20261120_203216.jpg Views:	0 Size:	194.9 KB ID:	892058
                  Looks like the rings from Harbor Freight. I have found that the orings that come in most of the carb rebuild kits are too small and don't make a good seal against the tank. I use these and never have a problem.
                  2 - 80 LGs bought one new
                  81 LH
                  02 FXSTB Nighttrain
                  22 FLTRK Road Glide Limited
                  Jim

                  Comment

                  • speedlimit85
                    XStremely XSive
                    • Jan 2017
                    • 490
                    • Gainesville, Fl.

                    #69
                    That 850 special made it to Miami in 1990 then leaked gas out out of the same spot. I remember the fiber washers might have fixed it.
                    80 G

                    Comment

                    Working...