Fj1200-xs1100 carbs

[Brill cafe xs1100]

Hello, i got a set of fj1200 carbs for pennies on the dollar and i was wondering if itd be an advantage to run them, i havent seen a very straight forward answer just seen that its been done by others

[oldyam80sg]

I don't know if those particular carbs will work. I know Kawasaki ZRX carbs will work. I have carbs off a Kawasaki GPZ 1100 I believe that just don't have the K-tric like the ZRX carbs have. My GPZ carbs are sitting in a box in my living room, as I bought them and just got over a medical issue and kept the stock carbs on. I wanted to ride and not play with them. Some topics on the ZRX carbs are on this site.

[cajun31]

Do a search on this site and you will find at least one thread where a member used them. I do know the carbs are BS36 not BS34's. I believe the FJ 1200's also use a push pull cable vs the pull cable the XS1100 employs. Meaning some changes will have to be made. I also think you would have to restrict the vacuum advance because these carbs have no place to hook that up to. Might also have to change the jetting on the carbs as well. It is doable but I am not sure you will get any performance gains from them. Is there any reason you need to replace your original carbs other than just curiosity?

[bikerphil]

IIRC, the spacing of the FJ carb bodies is different and won't line up with our rubber intake manifolds. A quick measurement will tell you.

[oldyam80sg]

ZRX carbs are not just put on and go either. Got to find a way for the throttle cables as stated above.

[DEEBS11]

Even if they line up the jetting challenges aren't worth the effort. Clean, stock carbs are hard to beat.

[DEEBS11]

For those with the funds:

[oldyam80sg]

Even if they line up the jetting challenges aren't worth the effort. Clean, stock carbs are hard to beat.

I got my GPZ 1100 carbs but my 80 SG ran excellent with the stock carbs was the reason why I didn't switch it.

[jetmechmarty]

https://youtu.be/5eUnbVAp8hI?si=YajAeTtBSys5AbEk

[DiverRay]

Deebs, the ebay photo shows KEIKEN carbs, NOT Mikuni! We all know those are NOT factory carbs.

[cajun31]

Deebs, the ebay photo shows KEIKEN carbs, NOT Mikuni! We all know those are NOT factory carbs.

Ray... I believe what Deebs posted are indeed Mikuni RS36 carbs. The video that Marty posted of Andy installing them on his basket case shows the same carbs. The listing that Deebs posted in the actual description say that the carbs have actually been pre-jetted and spaced correctly for the XS1100. I suspect that is why the price is a bit higher than others out there. One other thing that has to be considered if anyone is considering those for their XS1100's is that by default they are push pull cable carbs and in Andy's video he addresses that problem. Here is the actual link to the Ebay listing 1978-1981 Yamaha XS1100 Mikuni Carbs RS36 | eBay.