Announcement

Collapse
No announcement yet.

Chain drive conversion kit on ebay, ALMOST NO TIME LEFT!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chain drive conversion kit on ebay, ALMOST NO TIME LEFT!

    http://cgi.ebay.de/ws/eBayISAPI.dll?...985335081&rd=1

    Looks nice, but does it turn the right way? I don't need it. Just wanted to let you guys know.

    LP
    If it doesn't have an engine, it's not a sport, it's only a game.
    (stole that one from I-dont-know-who)

  • #2
    german parts

    after further review, I dont think its the correct part/ for an xj. I don't speak german but looks like they refer the part might work with an fzr 600 and I know that wont bolt up and work. The out put shaft on a 600 carries several gears on it and is about 8" long. The part on ebay had a shaft that looks to be about 3" long. How would one couple it to an exsisting shaft? and for an xj, The motor turns in reverse, cam tentioner is in the front, and the output shaft has a bearnig on the outside of the final gear. Thus it has to spin in the opposite direction to get the rear tire to spin forward. Xs's may be different. Top Cat could you verify my comments ? I maybe wrong wont be the last !! How cool would that be ! night all!!

    Comment


    • #3
      It looks like the real thing, the bolt holes are in the same places as the middle drive ones on the XS1100 (XJ11000) but....
      Way back, long ago, in a land far away, a French custom bike company called Moto Martin made special frames for production bikes - they were good but when they did one for the XS1100, they included a shaft drive conversion. This is what I think is being offered for sale.
      The problem with the conversion (and a lot of other chain drive conversions) was that the sprocket was too close to the engine, any slack in the chain would start to grind away at the upper crankcase housing. I've seen quite a few examples with Araldite (epoxy glue) repairs to the crankcase. There are also issues about the chain sizes but I can't remember what they were - best to ask the seller.

      I hope this of some help out there.

      Keep revving
      Mike Farnworth
      XS1100 E & XS1100 Sport Project

      Comment


      • #4
        It is!

        It's for yhe XS.

        Heres a translation:

        New conversion kit inclusive. all parts for the re-equipment of a XS1100 on chain.

        By the French company Martin in the Martin XS 1100 was blocked.

        Further parts for Yamaha XS 360/440, XJ 650/750/900 and FZR 600 on request. Telephone Tuesday until Friday 14:00-18:00 and Saturday 10:00-12:00 or by E-Mail.

        As usual e-Bay I, dispatch that or the buyer.

        Much fun when offering.


        Louis
        "There is no mechanical problem so difficult that it cannot be overcome by
        brute strength and ignorance" And possibly some Mouse Milk!
        '82 XJ1100J
        LED Dir and running lights
        LED Tail/Brake lights (4) one flashing
        Modulated H/L
        PIAA Driving lights
        YICS Eliminated
        750 FD

        Yamaha Factory X-1 Fairing and Luggage

        Comment

        Working...
        X