I have a 1981 XS1100 that shorts out every time I plug in the rectifier. It shows to be good and the white wires that lead to the stator coil show good readings too. Has anyone else seen this problem? Can the rectifier diodes short out under load?? Thanks James
Announcement
Collapse
No announcement yet.
rectifier shorted??
Collapse
X
-
Re: rectifier shorted??
Originally posted by onefunbud
I have a 1981 XS1100 that shorts out every time I plug in the rectifier. It shows to be good and the white wires that lead to the stator coil show good readings too. Has anyone else seen this problem? Can the rectifier diodes short out under load?? Thanks James
GeezerHi my name is Tony and I'm a bikeoholic.
The old gray biker ain't what he used to be.
-
James, Have you figured-out the rectifier issue?
I have a couple spares. If you want to pay the shipping I can send you one to swap it with.
If it solves the problem you can mail me a few bucks. If it doesn't, well then, at least you know that it's not the rectifier that is causing the problem.
I hate electrical problems. If I can't see it...........
Let me know.Mike
1980 SG "Angus"
Comment
-
Re: rectifier shorted??
Don't qoute me, but I think that the thing must be bolted to the frame to work. It is frame grounded.... There is no ground wire coming out of the wire clip. What makes you think it is shorting out?
Originally posted by onefunbud
I have a 1981 XS1100 that shorts out every time I plug in the rectifier. It shows to be good and the white wires that lead to the stator coil show good readings too. Has anyone else seen this problem? Can the rectifier diodes short out under load?? Thanks JamesSkids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.
Comment
-
None of my xs11's do. There is a male /female clip where there is an apparent ground on one side, but not the other side...
Originally posted by Geezer
The stock regulator/rectifier grounds through the wiring harness. It may also ground to the case but I'm not sure.
GeezerSkids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.
Comment
-
Originally posted by skids
None of my xs11's do. There is a male /female clip where there is an apparent ground on one side, but not the other side...
GeezerHi my name is Tony and I'm a bikeoholic.
The old gray biker ain't what he used to be.
Comment
-
Originally posted by newmaac
James, Have you figured-out the rectifier issue?
I have a couple spares. If you want to pay the shipping I can send you one to swap it with.
If it solves the problem you can mail me a few bucks. If it doesn't, well then, at least you know that it's not the rectifier that is causing the problem.
I hate electrical problems. If I can't see it...........
Let me know.
No, still haven't solved the problem.. Have 2 other classic bikes and
they had shorts too but were easy to find...
Thanks for the offer, may take you up on it if don't find the problem soon...
Thanks Again....
James
Comment
-
Re: Re: rectifier shorted??
Originally posted by skids
Don't qoute me, but I think that the thing must be bolted to the frame to work. It is frame grounded.... There is no ground wire coming out of the wire clip. What makes you think it is shorting out?
I checked it on and off the frame. The rectifier part has a red, black, and 3 white wires.
None of the wires show to be grounded to the outside of the case so guess it's grounded
threw the wiring harness.
The reason I think it's shorted is because when I turn on the key with it unplugged there's
12v going to the fuse panel. But when I plug it in the voltage drops down to about 1 1/2
getting to the hot side of the fuses & the battery drains very quickly.
I'm open to any ideas... LOL
Thanks Again...
James
.
Comment
-
Re: Re: Re: rectifier shorted??
Originally posted by onefunbud
Thanks for the response...
I checked it on and off the frame. The rectifier part has a red, black, and 3 white wires.
None of the wires show to be grounded to the outside of the case so guess it's grounded
threw the wiring harness.
The reason I think it's shorted is because when I turn on the key with it unplugged there's
12v going to the fuse panel. But when I plug it in the voltage drops down to about 1 1/2
getting to the hot side of the fuses & the battery drains very quickly.
I'm open to any ideas... LOL
Thanks Again...
James
Should have added here that this is with the fuses removed and headlight unplugged...
.
Comment
Comment