It appears Swampthing is at the end of the line..awaiting another more seasoned opinion but from everything i see .. This is still preliminary BUT..I think the frame is bent...front fairing got pushed into the forks and the right side of the tank so that bracket is also bent..centerstand appears to be bent too...bike is on CS but rear wheel is still in full contact with the floor in the shed. with front wheel straight you can see the handlebars are not aligned properly... Looking straight back from the front of the bike and the seat is not level...right side is lower than the left..i made sure i had the seat aligned correctly.....looks like it will be parted out..or sold as a parts bike... I cannot forsee nor do I know anyone who would be willing to take on a donor frame transplantation ...
Announcement
Collapse
No announcement yet.
End of the line...
Collapse
X
-
So it's basically a bent rolling frame with a good engine and some parts? That's a bummer.-- Scott
_____
♬
2004 ST1300A: No name... yet
1982 XJ1100J: "Baby" SS Brakes, '850 FD, ACCT
1980 XS1100G: "Columbo" SS Brakes, '850 FD, ACCT
1979 XS1100SF: "Bush" W.I.P.
1979 XS1100F: parts
2018 Heritage Softail Classic 117 FLHCS SE: "Nanuk" It's DEAD, it's not just resting. It is an EX cycle.
♬
-
-
-
Thanks Randy...ill know for sure this weekend..if its a bent frame..then im gonna just hang it up owning and riding these old bikes. The past 6 years i have not even had a comfortable ride..seems i rarely do get comfortable anymore...1980 XS650G Special-Two
1993 Honda ST1100
Comment
-
Originally posted by DAVINCI View PostYou know you could start Wingin' it, it's the most comfortable thing I've ever ridden. Well, mechanical thing anyways
Take care and heal quick.Last edited by madmax-im; 06-30-2017, 01:47 PM.1980 XS650G Special-Two
1993 Honda ST1100
Comment
-
Originally posted by madmax-im View PostIt appears Swampthing is at the end of the line..awaiting another more seasoned opinion but from everything i see .. This is still preliminary BUT..I think the frame is bent...front fairing got pushed into the forks and the right side of the tank so that bracket is also bent..centerstand appears to be bent too...bike is on CS but rear wheel is still in full contact with the floor in the shed. with front wheel straight you can see the handlebars are not aligned properly... Looking straight back from the front of the bike and the seat is not level...right side is lower than the left..i made sure i had the seat aligned correctly.....looks like it will be parted out..or sold as a parts bike... I cannot forsee nor do I know anyone who would be willing to take on a donor frame transplantation ...
guess I shoulda read this string before responding to the other one, eh?
Option two:- hang a sidecar on it!
Sidecars don't care about bent frames because they corner funny anyway.
And 3 wheels will keep you "in the wind" for at least another decade.
Gawd knows I dared not ride my Flying Pumpkin's tug solo even when I built the rig and I was only in my 60s back then.Fred Hill, S'toon
XS11SG with Spirit of America sidecar
"The Flying Pumpkin"
Comment
-
When I saw the pictures Ben, I thought the frame was bent. Too bad, just when you had it the way you wanted it.Slow down and enjoy life. If you are in that much of a hurry, you should have left eariler.
Current rides:
80 XS1100SG
82 JX1100
83 Venture Royale
86 V-Max
Comment
Comment