T-Junction between carbs

[Padre4art]

Hi - Does anyone know where to purchase the T-junction between carbs (where the fuel line connects) on the XS11F? Looks like one of mine has been replaced already.

Are they the same for 1-2 and 3-4 carbs?

Thanks

Art

[speedlimit85]

https://www.mikesxs.net/yamaha-xs650...ne-t-5-16.html

You mean these?

[speedlimit85]

Or:

https://www.z1enterprises.com/fuel-l...uot-10-pk.html

[Padre4art]

No, what I am looking for is the t joint that connects a pair of two carbs with the one fuel line . . . there are two of these per set of four carbs.

Thanks

Art

[JeffH]

In the Repairs Section / carbs & fuel jetmechmarty posted at the bottom Sirius Consolidated. That's where I got my brass replacement T's . Fit well, easy install and no more leaks. Been trouble free for four years and 20,000 miles on my 11E.

http://www.xs11.com/forum/showthread.php?t=36207

siriusconinc.com

Hope that's what you were looking for. The brass T's

Jeff

[natemoen]

There are 2 different Tee's. The short ones and the longer ones (i don't remember which one does where ATM) Here are both. I think the longer ones are the upper vent Tee's and the shorter ones are the fuel Tee's.

Short
https://www.siriusconinc.com/pro-det...roduct_id=2743

Long
https://www.siriusconinc.com/pro-det...roduct_id=2745

[Barbarosa]

Pretty sure the vent tee is 5/16 and fuel tee is 1/4 for the hoses.

[Barbarosa]

Pretty sure the vent tee is 5/16 and fuel tee is 1/4 for the hoses.

DUH. Brain farts from synching this weekend followed by Trailer Park Boys. Should have asked if the tees take O rings.

[bikerphil]

You can also repair your old T's, just beware of Harbor Freight O-Rings, they are not of the greatest quality, YMMV.

http://www.xs11.com/forum/showthread...841#post366841