Tweet
BMX bike handlebars are the same diameter as ours are. Seeing as how motorcycle bar ends can cost $40+...I suggest looking into ones for BMX that cost $20 at most and are designed to be used and abused. www.albes.com and www.danscomp.com are the two best places to look in the event any of you are interested.
-
XS1100SG "Lucy Ferr" - Build project. Biltwell Tracker bars, octy delete, rerouted breather hose, mini turn signals, bar end mirrors, TC's fuse block, TKAT fork brace. No fairings. No windscreen. No hard bags. More to come...eventually... -
I bought cheap eBay bar ends for my FJR1300 which I have installed 3/4" handlebars.
The bar ends were tested on a ride this summer with an unplanned parking lot drop.82 XJ1100 - sold
96 Honda Magna 750 - Girlfriend's bike
2000 ZRX1100 - sold
2003 FJR1300 - Silver rocket -
BMX ones are designed to be dragged, dropped, scraped, etc and all metal ones have recessed allen bolts to prevemt the bolts(and wedge mechanism) from getting damaged. I've been a BMXer for two decades and have seen certain pairs last a decade despite having been repeatedly(and thoroughly) abused.XS1100SG "Lucy Ferr" - Build project. Biltwell Tracker bars, octy delete, rerouted breather hose, mini turn signals, bar end mirrors, TC's fuse block, TKAT fork brace. No fairings. No windscreen. No hard bags. More to come...eventually...Comment
-
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltComment
-
The forces put on a BMX bike are far greater than you might realize. These bikes(that are 2-3x that weight) are designed to MASSIVE abuse(it's REALLY hard to break parts...and I mean REALLY F'IN HARD) And the bar ends are made from billet 6061-T6...just like the motorcycle specific ones. Except these have recessed bolts. Basically, youre gonna mess up your bars/controls/mirrors well before you destroy these bar ends.XS1100SG "Lucy Ferr" - Build project. Biltwell Tracker bars, octy delete, rerouted breather hose, mini turn signals, bar end mirrors, TC's fuse block, TKAT fork brace. No fairings. No windscreen. No hard bags. More to come...eventually...Comment
-
Thanks for the tip!
JohnJohn is in an anonymous city with an Alamo (N29.519227,W-98.678980)
Go ahead, click on the bikes - you know you want to...the electrons are ready.
'81 XS1100H - "Enterprise"
Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine
"Not all treasure is silver and gold"Comment
-
You're welcome! And to make things easier...here's a link to the ones I buy.
XS1100SG "Lucy Ferr" - Build project. Biltwell Tracker bars, octy delete, rerouted breather hose, mini turn signals, bar end mirrors, TC's fuse block, TKAT fork brace. No fairings. No windscreen. No hard bags. More to come...eventually...Comment
Comment