Noob questions: component identification

[zzay]

what is this little thing with a fuse on it? It has two unused terminal screws on the bottom and I want to do away with it and/or move the fuse into my new fuse box.




bonus: previous owner fixed a broken bolt on the rear master cylinder with a c-clamp

[bikerphil]

It is for adding 12V accessories to your bike, not needed for normal operation.

[zzay]

It is for adding 12V accessories to your bike, not needed for normal operation.

excellent, thank you

[zzay]

What's this can?

[bikerphil]

Flasher relay for turn signals.

[motoman]

It is for adding 12V accessories to your bike, not needed for normal operation.

Very true.....but I'd leave it as is.

[skids]

It is a good place for the leads of a battery charger.

[mack]

The sooner

you replace that fuse box the better. Good time to clean all the connectors that sit behind the box as well. Here is what I did.

[zzay]

replaced the fuse box with a $9 Amazon special. I'll put liquid electrical tape on the solder joints next weekend. Almost done with the electrical...

I decided early on that my first priority would be to get it running. Getting it cleaned up and looking nice will come later. Brakes are the next task on the list.

[MaximPhil]

replaced the fuse box with a $9 Amazon special. I'll put liquid electrical tape on the solder joints next weekend. Almost done with the electrical...

I decided early on that my first priority would be to get it running. Getting it cleaned up and looking nice will come later. Brakes are the next task on the list.

Hi Zzay,
The picture is posted upside down which will give some of us a head ache Most people use connectors on the wires to the fuse block. But being unconventional is not a problem around here
Phil

[TopCatGr58]

Yeah, ZZay,

http://www.xs11.com/forum/showpost.p...5&postcount=10

I offer them WITH the set of connectors for only $10.00 S&H included. But soldering the wires to the block is another way to go.

T.C.