Announcement

Collapse
No announcement yet.

Saddle Bags question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Saddle Bags question

    Do the Yamaha Venture Bags also fit the specials? I currently have them on an F The mount that bolts to the shock and turn signal fit but the bottom mount to the foot peg does not lie up. I purchased a NOS Vetter brackets haven't installed them yet but they look well thought out.

    TIA
    Rick
    XS1100F TKAT fork brace Stock suspension. Vetter Fairing. Pingel Petcocks. Geezer voltage regulator
    http://s910.photobucket.com/albums/a...t=DSCF3026.jpg
    650SF
    http://s910.photobucket.com/albums/a...t=DSCF2647.jpg
    XS1100SG Project bike
    http://s910.photobucket.com/albums/a...t=DSCF3034.jpg

  • #2
    The bags fit both Standards and Specials, however the frame mounted crash bars on the rear I think were different for Specials and Standards. It seems I went through a couple sets of crash bars when I was setting mine up before it was lined up. I think at the time I thought the bars were bent. And maybe they were and I am wrong but I eventually got my bags mounted on my 80 SG.

    John
    John is in an anonymous city with an Alamo (N29.519227,W-98.678980)

    Go ahead, click on the bikes - you know you want to...the electrons are ready.
    '81 XS1100H - "Enterprise"
    Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine

    "Not all treasure is silver and gold"

    Comment


    • #3
      Originally posted by Rickrod3 View Post
      Do the Yamaha Venture Bags also fit the specials? I currently have them on an F The mount that bolts to the shock and turn signal fit but the bottom mount to the foot peg does not lie up. I purchased a NOS Vetter brackets haven't installed them yet but they look well thought out.

      TIA
      Rick
      The Specials and the '81 Venture/standard used the same exhaust system (and mounting points) so those saddlebags will interchange. The '78-80 standards have different exhaust and mounts. The front lower mounting point for the bags is the rear footpegs which is different between the two exhaust types which is why the bags won't directly interchange without some 'adapting'. All other mounting points are the same.
      Fast, Cheap, Reliable... Pick any two

      '78E original owner - resto project
      '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
      '82 XJ rebuild project
      '80SG restified, red SOLD
      '79F parts...
      '81H more parts...

      Other current bikes:
      '93 XL1200 Anniversary Sportster 85RWHP
      '86 XL883/1200 Chopper
      '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
      Cage: '13 Mustang GT/CS with a few 'custom' touches
      Yep, can't leave nuthin' alone...

      Comment


      • #4
        Originally posted by crazy steve View Post
        The Specials and the '81 Venture/standard used the same exhaust system (and mounting points) so those saddlebags will interchange. The '78-80 standards have different exhaust and mounts. The front lower mounting point for the bags is the rear footpegs which is different between the two exhaust types which is why the bags won't directly interchange without some 'adapting'. All other mounting points are the same.
        That's what I thought does that also include the 79 Special?
        XS1100F TKAT fork brace Stock suspension. Vetter Fairing. Pingel Petcocks. Geezer voltage regulator
        http://s910.photobucket.com/albums/a...t=DSCF3026.jpg
        650SF
        http://s910.photobucket.com/albums/a...t=DSCF2647.jpg
        XS1100SG Project bike
        http://s910.photobucket.com/albums/a...t=DSCF3034.jpg

        Comment


        • #5
          Yep, all the Specials.... The '79 Special frame does have differences compared to the '80-81 models, but not where this is concerned.
          Fast, Cheap, Reliable... Pick any two

          '78E original owner - resto project
          '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
          '82 XJ rebuild project
          '80SG restified, red SOLD
          '79F parts...
          '81H more parts...

          Other current bikes:
          '93 XL1200 Anniversary Sportster 85RWHP
          '86 XL883/1200 Chopper
          '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
          Cage: '13 Mustang GT/CS with a few 'custom' touches
          Yep, can't leave nuthin' alone...

          Comment


          • #6
            Thanks Steve
            XS1100F TKAT fork brace Stock suspension. Vetter Fairing. Pingel Petcocks. Geezer voltage regulator
            http://s910.photobucket.com/albums/a...t=DSCF3026.jpg
            650SF
            http://s910.photobucket.com/albums/a...t=DSCF2647.jpg
            XS1100SG Project bike
            http://s910.photobucket.com/albums/a...t=DSCF3034.jpg

            Comment

            Working...
            X