Tweet
I pulled the front wheel and took it down to have a new tire mounted.
In trying to reinstall the wheel I noticed the notched area on the gear assembly has sheared off the corner.
The notched area is held by the stub on the fork. This keeps the speedo gear housing from rotating on the axle etc.
When I tighten the axle castle nut, the gear housing slips out the notch at the end of the fork. Things then become mis-aligned on the front axle.
I have removed the calipers, fender, fork brace.
The part I am referring to is:
341-25190-01-00 (GEAR UNIT ASSY )
Is there a way to fix what I have or do I need to find another gear housing ?
Any and all advice appreciated!
In trying to reinstall the wheel I noticed the notched area on the gear assembly has sheared off the corner.
The notched area is held by the stub on the fork. This keeps the speedo gear housing from rotating on the axle etc.
When I tighten the axle castle nut, the gear housing slips out the notch at the end of the fork. Things then become mis-aligned on the front axle.
I have removed the calipers, fender, fork brace.
The part I am referring to is:
341-25190-01-00 (GEAR UNIT ASSY )
Is there a way to fix what I have or do I need to find another gear housing ?
Any and all advice appreciated!
Comment