Looking for a thread for non working turn signals...

[brcree]

Can't seem to find anything on non working turn signals.........81 SP. Were working until I replaced horn button. Can't see any loose wires in there.

[shane007]

Here's one for the Aus forums. http://xs1100.com.au/forum/index.php?topic=1962.0
On mine it turned out to be the flasher unit. You can replace it with any 2 prong no load auto flasher if that's your problem. I also had a wire break about 8 inches after my switch. Hopefully someone with more wiring experience on these will chime in. Good luck man.

[BowlingSS]

Are the turn signals light on or not flashing or both?

If they are not flashing I would check the flasher unit.

Bill

[brcree]

non working turn sigs.

The emerg. flashers are working but nothing else.

[brcree]

turn sigs.

FIXED!!!!!!!!.. Took out the turn sig. cancel relay......swapped to the flasher relay! No auto cancel but hey...works.

[tn11]

Great fix. Maybe something shorted the relay circuit when you changed the horn button. It happens.

[bikerphil]

I just bought some of these electronic flashers, they still flash quickly even after the battery is discharging waiting for a long red light...

http://www.ebay.com/itm/291469239371...%3AMEBIDX%3AIT

[brcree]

turn sigs

Yes Tn.....always good when it comes together.