Rear left wheel bearings

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • James England
    XS-XJ Super Guru
    • Oct 2010
    • 3039
    • North of England
    #1

    Rear left wheel bearings

    Hi All

    I just posted in the spares for sale section of the forum but thought I would double up here as this bit is busier usually and i can point people in the right direction. I have a small supply of rear left wheel bearings available....... Details in the other thread..........
    XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.
    Tags: None
    • skids
      XS-XJ Super Guru
      • Jul 2002
      • 5057
      • Florissant, CO, USA
      #2
      I think James has a bearing factory in his house!
      Skids (Sid Hansen)

      Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

        Comment

        • James England
          XS-XJ Super Guru
          • Oct 2010
          • 3039
          • North of England
          #3
          Originally posted by skids
          I think James has a bearing factory in his house!
          Yes, I recycle old baked bean tins. I'm getting pretty good at it......
          XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

            Comment

            • skids
              XS-XJ Super Guru
              • Jul 2002
              • 5057
              • Florissant, CO, USA
              #4
              Originally posted by James England
              Yes, I recycle old baked bean tins. I'm getting pretty good at it......
              I knew it! Making your own gas as well!
              Skids (Sid Hansen)

              Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.

                Comment

                • James England
                  XS-XJ Super Guru
                  • Oct 2010
                  • 3039
                  • North of England
                  #5
                  Originally posted by skids
                  I knew it! Making your own gas as well!
                  well, I was running my 2.3L Diesel Ford on straight sunflower oil years ago......... But I always run the bikes on fresh air....
                  XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

                    Comment

                    • 650mark
                      XStremely XSive
                      • Jul 2012
                      • 307
                      • Mesa, Az.
                      #6
                      hi james, I bought a spare bearing from you last year, hope i'll never need it. ran across a guy with a beat up xs1100 last week here in phoenix Arizona. just out of curiousity we put his bike up on the centerstand and spun the rear wheel. crunchiest sounding bearing I've ever heard! I think he'll be ordering one from you very soon. thanks for all you do for this group

                        Comment

                        • James England
                          XS-XJ Super Guru
                          • Oct 2010
                          • 3039
                          • North of England
                          #7
                          Originally posted by 650mark
                          hi james, I bought a spare bearing from you last year, hope i'll never need it. ran across a guy with a beat up xs1100 last week here in phoenix Arizona. just out of curiousity we put his bike up on the centerstand and spun the rear wheel. crunchiest sounding bearing I've ever heard! I think he'll be ordering one from you very soon. thanks for all you do for this group
                          Oops! Sounds fairly typical. I see you did not chivalrously offer him your spareVery wise!
                          XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

                            Comment

                            • James England
                              XS-XJ Super Guru
                              • Oct 2010
                              • 3039
                              • North of England
                              #8
                              Update

                              Hi All

                              Everyone who PMd me re bearings and bought some will be pleased to know that they are all on the way, airmail. Usually they arrive within 10 days, so watch out for the mailman....
                              XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

                                Comment

                                • ViperRon
                                  XS-XJ Guru
                                  • Feb 2011
                                  • 1062
                                  • Woodstock, VA
                                  #9
                                  As long as the address prints correct I never have to worry about US mail here but UPS gets lost sends my stuff to other places tells me I was not at home etc etc.


                                  Thanks Sir Barron of Bearings
                                  To fix the problem one should not make more assumptions than the minimum needed.

                                  Rodan
                                  https://www.youtube.com/watch?v=khm6...liHntN91DHjHiS
                                  1980 G Silverbird
                                  Original Yamaha Fairfing and Bags
                                  1198 Overbore kit
                                  Grizzly 660 ACCT
                                  Barnett Clutch Springs
                                  R1 Clutch Fiber Plates
                                  122.5 Main Jets
                                  ACCT Mod
                                  Mac 4-2 Flare Tips
                                  Antivibe Bar ends
                                  Rear trunk add-on
                                  http://s1184.photobucket.com/albums/z329/viperron1/

                                    Comment

                                    • James England
                                      XS-XJ Super Guru
                                      • Oct 2010
                                      • 3039
                                      • North of England
                                      #10
                                      Originally posted by ViperRon
                                      As long as the address prints correct I never have to worry about US mail here but UPS gets lost sends my stuff to other places tells me I was not at home etc etc.


                                      Thanks Sir Barron of Bearings
                                      Well, you'll be live to know that the bearings are delivered by USPS and that I make sure the package is thin enough to go through a standard letterbox!
                                      XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

                                        Comment

                                        • DiverRay
                                          Moderator
                                          • Nov 2004
                                          • 7694
                                          • Star, IDAHO
                                          #11
                                          I make sure the package is thin enough to go through a standard letterbox!
                                          Yeah, but is that UK or US letter size?? I've still one spare, so I will wait to see if anyone else needs one before I get greedy.
                                          Ray Matteis
                                          KE6NHG
                                          XS1100 E '78 (winter project)
                                          XS1100 SF Bob Jones worked on it!

                                            Comment

                                            • James England
                                              XS-XJ Super Guru
                                              • Oct 2010
                                              • 3039
                                              • North of England
                                              #12
                                              Originally posted by DiverRay
                                              Yeah, but is that UK or US letter size?? I've still one spare, so I will wait to see if anyone else needs one before I get greedy.
                                              Universal fit! I carried out a global survey of letterbox sizes. Only mailboxes in the Antarctic are too small.....

                                              It's very noble of you to wait but it's first come, first served, and everyone knows they are here. So get one if you want.
                                              XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.

                                                Comment

                                                Previous template Next
                                                Working...