What size studs

[1234loft]

I have a set of Kerker 4 into one headers.
Does anyone know what size studs I need to order to make this work?
Thanks, JG

[bikerphil]

If you have a Standard model XS, you're existing ones should be the right length, if you have a Special, you will probably need to change them, they will be too short.

[1234loft]

I have a special.
The PO was using bolts and they only went in a few threads.
I was curious as to the correct size if anyone had it.
No one in town has them and I will need to order.

[1234loft]

Do these look like the correct studs?

https://www.belmetric.com/s8x35p-metric-stud-p-1444.html?zenid=hreb746d8etk4bvfj1ndnl3p53&cPath=9_71

[DiverRay]

I think these would work better:https://www.belmetric.com/s8x43-metr...p53&cPath=9_71, or you can just go down to the local parts store and buy the smallblock Chevy studs for the "new" engine! cheap and easy.... I know they work as I used them on a '79 Standard WITH the Kerker headers.

[1234loft]

Got it, thanks much