Tweet
Sorry if this has already been addressed, but the search function isn't working on my phone. Has anyone used the rh control from a zrx 12? I'm trying to use it with the zrx carbs and I am getting stuck on the wiring. What wires connect to each other from the starter button and kill switch to the xs11s wiring? Any help would be much appreciated
-
1979 xs special, just finished the top end rebuild and then i still have lots of work.
progress thus far...
http://s1268.photobucket.com/albums/...t=IMAG0202.jpg
"If it runs bad, it's usually the carbs. If the tires go flat, I suspect the carbs. If the wind blows the bike over, the carbs were probably to blame. If my wife yells at me about something, I tell her to talk to the carbs" -Incubus -
You might have slightly different color wires, but it should be the same idea
http://www.xs11.com/forum/showthread.php?t=39820
Hope that helps.79 SF 3H3 Engine, 145/45 Mikuni Jets, El Cheapo Pod Filter Mod w/ EMGO Pods, Coil Repower w/ Dyna Coils, Accell Wires and Side Gapped Plugs, 78 Mech Advance, 4-2 Turnouts
Comment