Carb Nozzle & Needle Part Numbers

[Schming]

Available Yet ?

Just for clarification, parts to become available should be as follows:

Fits Models E, F, SF:
5GZ6 Main Needle
266 X-2 Emulsion Nozzle
Idle Mix Screws

Fits Models G, SG, LG, H, SH, LH
5GL16 Main Needle (with added adjustment slots)
300 X-2 Emulsion Nozzle
Idle Mix Screw

Have these parts become available ?

I'm in need of two nozzles for an SH if anyone has them stashed.

Thanxs

[motoman]

The following are Yamaha part numbers for carburetor main nozzle and needles broken down for all years of the XS and XJ models. I included the pilot screw number (the idle mix screw everyone breaks the tip on) on earlier models but the later models do not show it in the microfiche... I assume they are the same throughout but have no evidence of that.

1978 XS 1100 E
Main Nozzle: 2H7-14941-02-00
Needle: 2H7-14116-06-00
Pilot Screw: 2AZ-14923-00-00

1979 XS 1100 F
Main Nozzle: 2H7-14941-02-00
Needle: 2H7-14116-06-00
Pilot Screw: 2AZ-14923-00-00

Yamaha Microfiche did not list the 79SF, I will assume it is the same as the '79F unless otherwise told different.

1980 XS 1100 G
Main Nozzle: 3H5-14941-02-00
Needle: 360-14116-07-00
Pilot Screw: none listed

1980 XS 1100 SG
Main Nozzle: 3H5-14941-02-00
Needle: 452-14116-16-00
Pilot Screw: none listed

1980 XS 1100 LG
Main Nozzle: 3H5-14941-02-00
Needle: 452-14116-16-00
Pilot Screw: none listed

1981 XS 1100 H
Main Nozzle: 3H5-14941-02-00
Needle: 360-14116-07-00
Pilot Screw: none listed

1981 XS 1100 SH
Main Nozzle: 3H5-14941-02-00
Needle: 360-14116-07-00
Pilot Screw: none listed

1981 XS 1100 LH
Main Nozzle: 3H5-14941-02-00
Needle: 452-14116-16-00
Pilot Screw: none listed

'80 and later models had a raised shoulder on idle mix screw to keep that from happening(shoulder seats before tip).